Wraps by car

Nash Ambassador wrap

A Nash Ambassador wrap covers the full body of the car in vinyl wrap. The catalog includes two generations of the Ambassador, the first from 1932–1948 and the third from 1952–1957. For the newest body, a full wrap takes about 64 ft (19.5 m) to 66 ft (20 m) of 60-inch (1.52 m) cast film.

2generations

Nash Ambassador, third generation, factory photo
Nash Ambassador, third generation. Factory color shown.

Nash Ambassador wrap colors and ideas

  • Ambassador black wrap
  • Ambassador white wrap
  • Ambassador gray wrap
  • Ambassador silver wrap
  • Ambassador red wrap
  • Ambassador blue wrap
  • Ambassador green wrap
  • Ambassador yellow wrap
  • Ambassador orange wrap
  • Ambassador purple wrap
  • Ambassador pink wrap
  • Ambassador teal wrap
  • Ambassador brown wrap
  • Ambassador gold wrap
  • Ambassador chrome wrap
  • Ambassador color shift wrap
  • Ambassador carbon fiber wrap
  • Ambassador camo and patterned wrap

How much vinyl to wrap a Nash Ambassador

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1952–1957sedan (4 doors)——
1932–1948convertible, coupe, sedan (2 or 4 doors)210.2 in (5,340 mm)about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Ambassador wrap cost factors

Ambassador wrap cost depends on the area covered, the body style, and the film choice. The first generation convertible takes about 64 ft (19.5 m) and the sedan about 66 ft (20 m). The third generation sedan also takes about 66 ft (20 m) of 60-inch cast film. Adding a chrome delete or a patterned film increases the amount of material needed.

  • Body: sedan (4 doors).

Ambassador wraps by generation

Swipe sideways. Tap a card for the full description.

Nash Ambassador, third generation, factory photo
Factory color shown

1952–1957 Ambassador sedan (third generation)

1952–1957sedan (4 doors)

The third generation Nash Ambassador spans 1952–1957 as a four-door sedan. Paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check how the film bonds to the surface. A wrap installer should inspect each panel for rust or old paint before film is applied.

Nash Ambassador, first generation, factory photo
Factory color shown

1932–1948 Ambassador convertible, coupe, sedan (first generation)

1932–1948convertible, coupe, sedan (2 or 4 doors)210.2 in (5,340 mm)

The first generation Nash Ambassador spans 1932–1948 with convertible, coupe, and sedan bodies. An open top is not wrapped when it is fabric and the film ends where it begins. A folding hard top is wrapped as panels of its own. The convertible uses about 64 ft (19.5 m) of 60-inch film for the wrapped parts.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an Ambassador

A partial wrap on a Nash Ambassador covers the roof, hood, or mirror caps. An Ambassador chrome delete covers window trim and badges with black film. Paint protection film is a clear film on the front end of the car. These jobs use less material than a full wrap but need the same care on edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nash Ambassador: body, cut-outs and film

A Nash Ambassador vinyl wrap changes with the body styles and sizes of the car. The third generation sedan has four doors and uses about 66 ft (20 m) of 60-inch film. The first generation offers convertible, coupe, and sedan bodies, with the convertible taking about 64 ft (19.5 m). The largest body in these years is the sedan, which needs slightly more film than the convertible.

Ambassador wrap ideas start with the parts that need cut-outs or come off. Door handles, badges, and window trim are removed or wrapped carefully. On the first generation convertible, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own on that body.

How much vinyl to wrap an Ambassador depends on the generation and its bodies. The first generation (1932–1948) has three styles, and the convertible uses 64 ft (19.5 m) while the sedan uses 66 ft (20 m). The third generation (1952–1957) has only a four-door sedan in this catalog, which takes 66 ft (20 m). Chrome or patterned film on any body raises the total to about 77 ft (23.5 m).

Questions about wrapping a Nash Ambassador

How much vinyl does it take to wrap a Nash Ambassador?

A Nash Ambassador takes about 64 ft (19.5 m) to 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation convertible uses the lower figure and the sedan uses the higher one. The third generation sedan also uses about 66 ft (20 m).

Can I wrap only the hood or the roof of an Ambassador?

Yes, you can wrap only the hood or the roof of an Ambassador. The partial wrap list includes roof, hood, and mirror caps for this car. Chrome delete on window trim and badges is a separate smaller job.

Is an Ambassador hard to wrap?

An Ambassador adds work on the first generation convertible because the fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own. The car is 210.2 in (5,340 mm) long on that generation, which adds seams and handling time.

How many generations of the Ambassador does this page cover?

This page covers two generations of the Nash Ambassador. They are the first generation from 1932–1948 and the third generation from 1952–1957. The third generation is a four-door sedan, and the first has convertible, coupe, and sedan bodies.