Wraps by car

Nio ET7 wrap

The Nio ET7 wrap page covers the full-size luxury sedan built from 2022 onward. The catalog includes one generation of the ET7, the first generation. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Nio ET7, first generation, factory photo
Nio ET7, first generation. Factory color shown.

Nio ET7 wrap colors and ideas

  • Nio ET7 black wrap
  • Nio ET7 white wrap
  • Nio ET7 gray wrap
  • Nio ET7 silver wrap
  • Nio ET7 red wrap
  • Nio ET7 blue wrap
  • Nio ET7 green wrap
  • Nio ET7 yellow wrap
  • Nio ET7 orange wrap
  • Nio ET7 purple wrap
  • Nio ET7 pink wrap
  • Nio ET7 teal wrap
  • Nio ET7 brown wrap
  • Nio ET7 gold wrap
  • Nio ET7 chrome wrap
  • Nio ET7 color shift wrap
  • Nio ET7 carbon fiber wrap
  • Nio ET7 camo and patterned wrap

How much vinyl to wrap a Nio ET7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowsedan (4 doors)200.7 in (5,098 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Nio ET7 wrap cost factors

The Nio ET7 wrap cost depends on the size of the sedan, the film chosen, and the number of cut-outs. A chrome or patterned film needs about 69 ft (21 m), which is more material than a solid color cast film. Every trim has a panoramic glass roof, so the roof area is not wrapped, reducing the total film.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has flush door handles: each handle is wrapped as a small piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has a tow hitch: a cut-out in the rear bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Nio ET7 wraps by generation

Swipe sideways. Tap a card for the full description.

Nio ET7, first generation, factory photo
Factory color shown

2022–now Nio ET7 sedan (first generation)

2022–nowsedan (4 doors)200.7 in (5,098 mm)

The first generation Nio ET7 has a panoramic glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, exactly where the glass panel begins. That leaves the roof as a natural contrast to the wrapped body panels.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has flush door handles: each handle is wrapped as a small piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has a tow hitch: a cut-out in the rear bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Nio ET7

A partial wrap on a Nio ET7 can cover the hood, mirror caps, and trunk lid. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Nio ET7: body, cut-outs and film

The Nio ET7 vinyl wrap fits one body style, a four-door sedan that is 200.7 in (5,098 mm) long. Its size means a full wrap uses more film than a compact car, so the installer must plan panel by panel. The flush door handles and the charge port door are wrapped as separate small pieces.

For Nio ET7 wrap ideas, the panoramic glass roof is never covered with film, so the roof stays dark against any wrap color. The bumpers have parking sensors, and the film is cut around each sensor. The body cameras need cut-outs around each lens, and the tow hitch needs a cut-out in the rear bumper film.

When counting how much vinyl to wrap a Nio ET7, the generation is the first generation, produced 2022–now. There is only one generation in the catalog, so the film estimate is the same for every year. A full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Nio ET7

How much vinyl does it take to wrap a Nio ET7?

Yes, a full wrap of a Nio ET7 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That is the estimate for the first generation, the only generation of this sedan in the catalog. The figure covers the body panels without the roof, because the panoramic glass roof is not wrapped.

Can the roof of a Nio ET7 be wrapped?

No, the roof of a Nio ET7 cannot be wrapped, because every trim has a panoramic glass roof. The film ends at the roof rails, and the glass is left uncovered. The roof stays dark no matter what color the film is on the rest of the car.

Can I wrap only the hood or the roof of a Nio ET7?

Yes, a partial wrap can cover only the hood or other parts of a Nio ET7. A typical partial job includes the hood, mirror caps, and trunk lid. You can also choose a chrome delete for the window trim and badges, or paint protection film on the front end.

Is a Nio ET7 hard to wrap?

Yes, a Nio ET7 is hard to wrap because of its size and the number of cut-outs. The 200.7 in (5,098 mm) body needs careful handling of large vinyl panels. The installer must cut around parking sensors, body cameras, the tow hitch, and wrap the flush door handles and charge port door as small separate pieces.