Wraps by car

Noble M12 GTO wrap

The Noble M12 GTO wrap page covers the first generation from 2000 to 2007. The Noble M12 GTO is a sports car built as a two-door coupe. A full vinyl wrap of this car takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 51 ft (15.5 m) for the whole body.

1generations12 mof film for a full wrap

Noble M12 GTO, first generation, factory photo
Noble M12 GTO, first generation. Factory color shown.

Noble M12 GTO wrap colors and ideas

  • M12 GTO black wrap
  • M12 GTO white wrap
  • M12 GTO gray wrap
  • M12 GTO silver wrap
  • M12 GTO red wrap
  • M12 GTO blue wrap
  • M12 GTO green wrap
  • M12 GTO yellow wrap
  • M12 GTO orange wrap
  • M12 GTO purple wrap
  • M12 GTO pink wrap
  • M12 GTO teal wrap
  • M12 GTO brown wrap
  • M12 GTO gold wrap
  • M12 GTO chrome wrap
  • M12 GTO color shift wrap
  • M12 GTO carbon fiber wrap
  • M12 GTO camo and patterned wrap

How much vinyl to wrap a Noble M12 GTO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2007coupe (2 doors)161.0 in (4,089 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

M12 GTO wrap cost factors

M12 GTO wrap cost depends on the amount of film, the number of panels, and the work needed to remove parts. The car is 161.0 in (4,089 mm) long and has two long side doors, each one large piece of film. Chrome or patterned film adds material because it takes about 51 ft (15.5 m) instead of 39 ft (12 m). A color change with standard cast film uses less film and fewer labor hours for pattern matching.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

M12 GTO wraps by generation

Swipe sideways. Tap a card for the full description.

Noble M12 GTO, first generation, factory photo
Factory color shown

2000–2007 M12 GTO coupe (first generation)

2000–2007coupe (2 doors)161.0 in (4,089 mm)

The first generation Noble M12 GTO was produced from 2000 to 2007. Paint age on a car of these years may be original or repainted, so a test spot comes before a full wrap. The installer checks a small area to see if the film adheres well and removes without lifting paint. The body is a two-door coupe with a length of 161.0 in (4,089 mm).

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on an M12 GTO

A partial wrap on the Noble M12 GTO covers the roof, hood, or mirror caps. For chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap of the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Noble M12 GTO: body, cut-outs and film

A Noble M12 GTO vinyl wrap works with a compact coupe body that is 161.0 in (4,089 mm) long. The body has a simple shape without complex curves, which makes laying film faster. Two long side doors are each one large piece of film, so each door panel needs careful alignment. The overall size keeps the wrap job manageable for one or two installers.

M12 GTO wrap ideas start with full color change, but cut-outs are needed around the lights, grille, and badges. The side mirrors, door handles, and trim come off for a clean install. The two long side doors are each one large piece of film, so a single piece covers each door without seams. For chrome delete, the window trim and badges are covered with black film.

How much vinyl to wrap an M12 GTO depends on the film type, and this page covers only the first generation from 2000 to 2007. A standard color change uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 51 ft (15.5 m) because the pattern must be matched. There are no other generations in this catalog to compare.

Questions about wrapping a Noble M12 GTO

How much vinyl does it take to wrap a Noble M12 GTO?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Noble M12 GTO in a standard color. For chrome or patterned film, the total is about 51 ft (15.5 m). These figures are for the first generation from 2000 to 2007, the only generation of this model.

Can I wrap only the hood or the roof of an M12 GTO?

Yes, you can wrap only the hood or the roof of an M12 GTO. Partial wrap jobs include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges or put clear paint protection film on the front end.

Is an M12 GTO hard to wrap?

Yes, an M12 GTO is harder to wrap than some cars because of its two long side doors, each one large piece of film. The doors need careful alignment and a single piece of film must be applied without wrinkles. The car is 161.0 in (4,089 mm) long, which is modest, but the large door panels add work. Paint age on a car of these years may also require a test spot before the full wrap.

How many generations of the M12 GTO does this page cover?

This page covers one generation of the M12 GTO, the first generation from 2000 to 2007. The Noble M12 GTO was built only as this one generation in the catalog. There are no other generations listed for this model.