Wraps by car

Pagani Zonda wrap

The Pagani Zonda wrap page covers the first generation sports car built from 1999 to 2009. A full vinyl wrap of this convertible or coupe takes about 44 ft (13.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. The Zonda remains a striking candidate for a color change wrap despite its age.

1generations13.5 mof film for a full wrap

Pagani Zonda, first generation, factory photo
Pagani Zonda, first generation. Factory color shown.

Pagani Zonda wrap colors and ideas

  • Zonda black wrap
  • Zonda white wrap
  • Zonda gray wrap
  • Zonda silver wrap
  • Zonda red wrap
  • Zonda blue wrap
  • Zonda green wrap
  • Zonda yellow wrap
  • Zonda orange wrap
  • Zonda purple wrap
  • Zonda pink wrap
  • Zonda teal wrap
  • Zonda brown wrap
  • Zonda gold wrap
  • Zonda chrome wrap
  • Zonda color shift wrap
  • Zonda carbon fiber wrap
  • Zonda camo and patterned wrap

How much vinyl to wrap a Pagani Zonda

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2009convertible, coupe (2 doors)174.6 in (4,435 mm)about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Zonda wrap cost factors

The Zonda wrap cost depends on the body style, film choice, and the condition of the paint. The convertible takes about 44 ft (13.5 m) of 60-inch film, while the coupe takes about 46 ft (14 m). Chrome or patterned film can push the material to about 57 ft (17.5 m). The labor is shaped by the long doors and the top type.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Zonda wraps by generation

Swipe sideways. Tap a card for the full description.

Pagani Zonda, first generation, factory photo
Factory color shown

1999–2009 Zonda convertible, coupe (first generation)

1999–2009convertible, coupe (2 doors)174.6 in (4,435 mm)

The open top of the first generation Pagani Zonda needs special handling in a vinyl wrap. On the convertible body the fabric top is not wrapped, and the film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. This means the installer must plan the cut lines before laying film on the rear deck.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Zonda

A partial wrap on a Pagani Zonda can cover the roof, hood, or mirror caps. The convertible roof is not wrapped, but the coupe roof is a good candidate. A Zonda chrome delete covers window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another smaller job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pagani Zonda: body, cut-outs and film

A Pagani Zonda vinyl wrap must handle two body styles, the convertible and the two-door coupe. The 174.6 in (4,435 mm) length means moderate material use for a two-seat sports car. The coupe needs about 46 ft (14 m) of film while the convertible needs about 44 ft (13.5 m). The long side doors allow a clean installation with minimal seams.

Zonda wrap ideas start with the long side doors, and each door is one large piece of film. A convertible body has a fabric top that is not wrapped, so the film ends where the top begins. A folding hard top is wrapped as panels of its own. The two-door layout keeps the number of cut-outs low.

For those who ask how much vinyl to wrap a Zonda, the answer depends on the generation and body style. This catalog lists one generation produced from 1999 to 2009, and a full wrap of the newest body takes about 44 ft (13.5 m) for the convertible to 46 ft (14 m) for the coupe. If you choose chrome or patterned film, plan for up to about 57 ft (17.5 m). The difference comes from the top design and the amount of trim coverage.

Questions about wrapping a Pagani Zonda

How much vinyl does it take to wrap a Pagani Zonda?

A Pagani Zonda takes about 44 ft (13.5 m) of vinyl for the convertible and about 46 ft (14 m) for the coupe, using 60-inch (1.52 m) cast film. If you plan chrome or patterned film, allow up to about 57 ft (17.5 m). These figures cover the first generation body from 1999 to 2009.

Is the top of a Zonda wrapped?

No, the fabric top of a Zonda convertible is not wrapped. The film ends where the top begins, and only the painted body panels are covered. If the car has a folding hard top, that top is wrapped as panels of its own.

Which Zonda body takes more film?

The Pagani Zonda coupe takes more film than the convertible, about 46 ft (14 m) versus 44 ft (13.5 m). The extra material goes to the roof and rear pillars that the convertible does not have. Chrome or patterned film raises the total for either body to about 57 ft (17.5 m).

Can I wrap only the hood or the roof of a Zonda?

Yes, you can wrap only the hood or the roof of a Pagani Zonda. The coupe roof is a single panel that suits a partial wrap, and the hood is also straightforward. Mirror caps are a small but visible option. A chrome delete on window trim and badges is another partial job.