A Peugeot 508 wrapped in green starts with the finish and the film before deciding on a full color change. Matte green suits the 508's modern shapes, while gloss or metallic green emphasizes the curves of the liftback, wagon or sedan. For a full wrap, expect to use about 48 ft (14.5 m) to 66 ft (20 m) of 60-inch (1.52 m) cast film, depending on the body and generation. Partial coverage like the hood or roof uses less film and changes just part of the car.
Factory paint on the 508 should be clean and free of chips before any green film is applied, so the wrap lays flat. Seams are planned where the film stops, and on the 508 the rear glass sits in the tailgate, so the film ends at its edge. For the second generation, every trim has a panoramic glass roof, which is not wrapped, so the roof film ends at the roof rails. Some trims have parking sensors, and the film is cut around each sensor for a clean look.
A green wrap on the Peugeot 508 is removable, and the film is designed to come off without leaving adhesive on the paint. Hand wash the wrapped 508 with a soft sponge and pH-neutral soap, and avoid automated brushes that can lift edges. Rinse with low pressure and dry with a microfiber towel to keep the green finish even. The film also protects the panels under it from small stone chips while it is on the car.
