Wraps by car

Piaggio Porter wrap

The Piaggio Porter wrap page covers the two generations of this small commercial vehicle and the vinyl wrap film a full wrap of the newest body takes, about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

2generations16.5 mof film for a full wrap

Piaggio Porter wrap colors and ideas

  • Porter black wrap
  • Porter white wrap
  • Porter gray wrap
  • Porter silver wrap
  • Porter red wrap
  • Porter blue wrap
  • Porter green wrap
  • Porter yellow wrap
  • Porter orange wrap
  • Porter purple wrap
  • Porter pink wrap
  • Porter teal wrap
  • Porter brown wrap
  • Porter gold wrap
  • Porter chrome wrap
  • Porter color shift wrap
  • Porter carbon fiber wrap
  • Porter camo and patterned wrap

How much vinyl to wrap a Piaggio Porter

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowpickup (2 doors)160.8 in (4,085 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1992–2020pickup, van (2 or 5 doors)133.9 in (3,400 mm)about 44 ft (13.5 m) for the pickup to 51 ft (15.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Porter wrap cost factors

Porter wrap cost depends on the film amount, body style, and the labor of handling the vehicle's specific surfaces. The second-generation Porter needs more film than the first generation, and the van body uses more than the pickup. The tall roof of the first generation (73.6 in (1,870 mm)) requires working from a platform, adding time to the job. The number of cut-outs, such as sliding door tracks or charge port doors, also influences the final cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: pickup (2 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Two long side doors: each door is one large piece of film.

Porter wraps by generation

Swipe sideways. Tap a card for the full description.

2021–now Porter pickup (second generation)

2021–nowpickup (2 doors)160.8 in (4,085 mm)

The second-generation Piaggio Porter is a 2021–now pickup with a cab and bed wrapped as two separate bodies. Because the inside of the bed is not wrapped, the film work focuses on the outer panels only. Its two long side doors are each covered with one large piece of film, which keeps seams to a minimum.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Piaggio Porter, first generation, factory photo
Factory color shown

1992–2020 Porter pickup, van (first generation)

1992–2020pickup, van (2 or 5 doors)133.9 in (3,400 mm)

The first-generation Piaggio Porter, built from 1992 to 2020, includes pickup and van styles, and paint age is a key factor before wrapping. Panels on these years may be original or repainted, so a test spot on the surface is done before a full wrap. This step checks how well the film will adhere to the older or repainted paint.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 44 ft (13.5 m) for the pickup to 51 ft (15.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Porter

A partial wrap on a Piaggio Porter can cover the roof, hood, or mirror caps, and a chrome delete covers window trim and badges with black film. Paint protection film (PPF) is another option: a clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look or protect high-wear areas without wrapping the whole vehicle.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Piaggio Porter: body, cut-outs and film

The Piaggio Porter vinyl wrap starts with body styles and sizes that shape the job. The pickup bed means the cab and bed are wrapped as two separate bodies, with the inside of the bed left bare. The newest Porter is 160.8 in (4,085 mm) long, while the first generation is 133.9 in (3,400 mm). These dimensions change how much film is needed and how panels are handled.

Porter wrap ideas include special cut-outs and removable parts that a wrap installer plans for. On the first generation, sliding side door tracks stay bare, and the film is cut along them. The second generation has two long side doors, each wrapped as one large piece of film. Electric and plug-in versions have a charge port door wrapped as its own small piece.

How much vinyl to wrap a Porter depends mainly on which generation and body style you have. For the newest Porter the film needed is about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film takes about 62 ft (19 m). First-generation pickups need about 44 ft (13.5 m), while vans require up to about 51 ft (15.5 m). Counting the wrap for the whole vehicle, the installer measures each panel before cutting.

Questions about wrapping a Piaggio Porter

How much vinyl does it take to wrap a Piaggio Porter?

A full wrap of a Piaggio Porter takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for the newest body. This figure covers the second-generation pickup, with its cab and bed wrapped as two bodies. Chrome or patterned film raises the amount to about 62 ft (19 m).

Is the bed of a Porter wrapped?

No, the inside of the Piaggio Porter pickup bed is not wrapped. The cab and the bed are treated as two separate bodies for film, but only their outer surfaces are covered. The bed's interior stays bare because it is a high-wear cargo area.

Can I wrap only the hood or the roof of a Porter?

Yes, you can wrap only the hood or the roof of a Piaggio Porter as a partial wrap. Other small jobs include mirror caps, chrome delete on window trim and badges, and clear paint protection film (PPF) on the front end.

Is a Porter hard to wrap?

A Piaggio Porter wrap has some challenges that add work for the installer. The pickup bed means wrapping two separate bodies, and the first generation has sliding side door tracks that must stay bare with film cut along them. The first generation's tall body, at 73.6 in (1,870 mm), also requires a platform for the roof.