A Panamera wrapped in carbon fiber film starts with choosing a carbon weave or forged carbon finish. Within each finish, films differ in sheen from gloss to matte, and in the size and direction of the pattern. The installer then sizes the film to the body: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film on the newest liftback, or up to 62 ft (19 m) on the wagon. The wrap can cover the whole body or selected panels like the hood and mirror caps.

Factory paint stays untouched under a carbon fiber wrap, because the film is laid over the clear coat and removed later. The body's shape decides where seams fall, and on a Panamera the tailgate with the rear glass in it means the film ends at the edge of the glass. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Some trims also have cameras in the body, and the film is cut around each lens.

A carbon fiber wrap on a Panamera is removable, and it comes off without changing the factory paint underneath. The film is cleaned with a hand wash, using water and a mild soap without abrasive tools. Keeping the car clean means the film is less likely to lift at the seams. A matte finish may need a cleaner made for matte films, and a ceramic coat made for wrap film can also be applied.