Wraps by car

Qoros 3 wrap

The Qoros 3 wrap page covers the compact hatchback and sedan built since 2014. This single-generation car comes in four- and five-door forms. A full vinyl wrap of the newest body takes about 52 ft (16 m) for the hatchback and 57 ft (17.5 m) for the sedan, using 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Qoros 3, first generation, factory photo
Qoros 3, first generation. Factory color shown.

Qoros 3 wrap colors and ideas

  • Qoros 3 black wrap
  • Qoros 3 white wrap
  • Qoros 3 gray wrap
  • Qoros 3 silver wrap
  • Qoros 3 red wrap
  • Qoros 3 blue wrap
  • Qoros 3 green wrap
  • Qoros 3 yellow wrap
  • Qoros 3 orange wrap
  • Qoros 3 purple wrap
  • Qoros 3 pink wrap
  • Qoros 3 teal wrap
  • Qoros 3 brown wrap
  • Qoros 3 gold wrap
  • Qoros 3 chrome wrap
  • Qoros 3 color shift wrap
  • Qoros 3 carbon fiber wrap
  • Qoros 3 camo and patterned wrap

How much vinyl to wrap a Qoros 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback, sedan (4 or 5 doors)174.7 in (4,438 mm) to 181.7 in (4,615 mm)about 52 ft (16 m) for the hatchback to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Qoros 3 wrap cost factors

The Qoros 3 wrap cost depends on film amount, body size and how many parts must be removed. A hatchback needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, while a sedan needs about 57 ft (17.5 m). Chrome or patterned film can take up to about 66 ft (20 m) because of matching. Labor rises when the tailgate glass and door handles require careful cut-outs.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Qoros 3 wraps by generation

Swipe sideways. Tap a card for the full description.

Qoros 3, first generation, factory photo
Factory color shown

2014–now Qoros 3 hatchback, sedan (first generation)

2014–nowhatchback, sedan (4 or 5 doors)174.7 in (4,438 mm) to 181.7 in (4,615 mm)

The first generation Qoros 3 offers a hatchback and a four- or five-door sedan. The hatchback is the shorter body at 174.7 in (4,438 mm) and uses about 52 ft (16 m) of film. The sedan stretches to 181.7 in (4,615 mm) and needs about 57 ft (17.5 m). The panel plan stays consistent between these styles except for the rear end.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the hatchback to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Qoros 3

For a Qoros 3 chrome delete, the bright window trim and badges are covered with black film. A partial wrap can cover just the roof, hood or mirror caps with color change film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs need much less vinyl than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Qoros 3: body, cut-outs and film

The Qoros 3 vinyl wrap job changes with the chosen body style. The hatchback is 174.7 in (4,438 mm) long and the sedan reaches 181.7 in (4,615 mm), so the sedan panels cover more area. These compact dimensions keep film use lower than on larger cars. Wrap installers plan each panel to follow the tailgate and door openings.

Qoros 3 wrap ideas start with the tailgate, where the rear glass is set into the metal panel. The film ends at the edge of that glass, and the installer trims a clean line around it. Door handles, badges and trim strips are removed or cut out for a neat finish. Mirror caps and roof rails, if fitted, need separate small pieces.

How much vinyl to wrap a Qoros 3 depends on which generation you have. The catalog lists one generation from 2014 onward, with the same body styles throughout. If you are counting film for a later model, the panel layout stays close to the original design. Measure the largest flat areas first: doors, roof and rear quarter panels.

Questions about wrapping a Qoros 3

How much vinyl does it take to wrap a Qoros 3?

Yes, it takes about 52 ft (16 m) for the hatchback and 57 ft (17.5 m) for the sedan. Those figures are for a full wrap with 60-inch (1.52 m) cast film on the newest body. If you choose chrome or patterned film, allow up to about 66 ft (20 m).

Which Qoros 3 body takes more film?

The sedan takes more film than the hatchback. The sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The hatchback needs about 52 ft (16 m) because it is shorter overall.

Can I wrap only the hood or the roof of a Qoros 3?

Yes, you can wrap only the hood or the roof. A partial wrap on the Qoros 3 can also cover the mirror caps. These smaller jobs use less vinyl than a full color change wrap.

Is a Qoros 3 hard to wrap?

No, the Qoros 3 is not especially hard to wrap, but the tailgate adds work. The rear glass is built into the tailgate, so the film must end at the edge of the glass. At 174.7 to 181.7 in (4,438 to 4,615 mm) long, the panels are manageable for a compact car.