Wraps by car

Radar RD6 wrap

The Radar RD6 wrap covers the full electric pickup body in vinyl wrap. This page covers the single generation built from 2022 to now. A full wrap of the newest body takes about 15.5 metres of film.

1generations

Radar RD6, first generation, factory photo
Radar RD6, first generation. Factory color shown.

Radar RD6 wrap colors and ideas

  • Radar RD6 black wrap
  • Radar RD6 white wrap
  • Radar RD6 gray wrap
  • Radar RD6 silver wrap
  • Radar RD6 red wrap
  • Radar RD6 blue wrap
  • Radar RD6 green wrap
  • Radar RD6 yellow wrap
  • Radar RD6 orange wrap
  • Radar RD6 purple wrap
  • Radar RD6 pink wrap
  • Radar RD6 teal wrap
  • Radar RD6 brown wrap
  • Radar RD6 gold wrap
  • Radar RD6 chrome wrap
  • Radar RD6 color shift wrap
  • Radar RD6 carbon fiber wrap
  • Radar RD6 camo and patterned wrap

How much vinyl to wrap a Radar RD6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowpickup (4 doors)——

Radar RD6 wrap cost factors

A Radar RD6 wrap cost depends on the film, the finish and the shop’s labour. The 15.5-square-metre size of this pickup sets the material figure. A pickup with a separate bed takes more film than an SUV of the same length. The charge port door and the bed-body split add small steps to the job.

  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Radar RD6 wraps by generation

Swipe sideways. Tap a card for the full description.

Radar RD6, first generation, factory photo
Factory color shown

2022–now Radar RD6 pickup (first generation)

2022–nowpickup (4 doors)

The first generation Radar RD6 is a four-door electric pickup built from 2022 to now. For the film, the cab and the bed are two bodies. The inside of the bed is not wrapped. The charge port door is wrapped as a small piece of its own.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

Roof, hood, chrome delete and PPF on a Radar RD6

Partial wrap on a Radar RD6 can cover the roof, hood or mirror caps alone. Chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is clear film for the front end. Each job uses less vinyl than a full wrap and keeps the pickup’s own color on the rest.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Radar RD6: body, cut-outs and film

A Radar RD6 vinyl wrap is shaped by the pickup body and its SUV-class size. The four-door cab and separate bed are wrapped as two bodies. The film follows the long roofline and deep bed sides. The inside of the bed stays bare and is not part of the wrap.

Radar RD6 wrap ideas begin with the charge port door, which is wrapped as its own small piece. The door handles, mirror caps and badges are removed or masked for clean edges. The tailgate is wrapped as part of the bed, not the cab. The roof rails and window trim stay in place and are cut around.

How much vinyl to wrap a Radar RD6 depends on one generation only. The 2022–now body is the only shape in the catalog. Film is counted for the cab and the bed as two bodies. The bed adds about a third to the total area of the cab.

Questions about wrapping a Radar RD6

How much vinyl does it take to wrap a Radar RD6?

It takes about 15.5 square metres (167 square feet) of vinyl to wrap a Radar RD6. That figure is for the full body of the newest generation, with the cab and bed as two bodies. The charge port door is counted as a small piece on its own.

Is the bed of a Radar RD6 wrapped?

No, the inside of the bed of a Radar RD6 is not wrapped. The cab and the outside of the bed are the two bodies covered with film. The inner walls and floor of the bed stay bare.

Can I wrap only the hood or the roof of a Radar RD6?

Yes, you can wrap only the hood or the roof of a Radar RD6. A partial wrap can cover the roof, hood or mirror caps. The rest of the pickup keeps its original color.

Is a Radar RD6 hard to wrap?

A Radar RD6 is a medium-hard wrap because of the pickup bed and the charge port door. The cab and bed are wrapped as two bodies, so the film is split at the gap. The charge port door is a small piece that needs its own cut and edge. The SUV-class size of the body adds plain area to cover.