Wraps by car

Rambler Ambassador wrap

The Rambler Ambassador wrap page covers the 1965–1972 first generation, the only body in this catalog. A full vinyl wrap of one of these full-size cars takes about 54 ft (16.5 m) for the convertible to 56 ft (17 m) for the sedan using 60-inch (1.52 m) cast film. Owners adding chrome or patterned film should plan for up to about 70 ft (21.5 m).

1generations16.5 mof film for a full wrap

Rambler Ambassador, first generation, factory photo
Rambler Ambassador, first generation. Factory color shown.

Rambler Ambassador wrap colors and ideas

  • Ambassador black wrap
  • Ambassador white wrap
  • Ambassador gray wrap
  • Ambassador silver wrap
  • Ambassador red wrap
  • Ambassador blue wrap
  • Ambassador green wrap
  • Ambassador yellow wrap
  • Ambassador orange wrap
  • Ambassador purple wrap
  • Ambassador pink wrap
  • Ambassador teal wrap
  • Ambassador brown wrap
  • Ambassador gold wrap
  • Ambassador chrome wrap
  • Ambassador color shift wrap
  • Ambassador carbon fiber wrap
  • Ambassador camo and patterned wrap

How much vinyl to wrap a Rambler Ambassador

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1965–1972convertible, coupe, sedan (2 or 4 doors)200.0 in (5,080 mm)about 54 ft (16.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Ambassador wrap cost factors

Ambassador wrap cost depends on body style, chosen film, and the amount of disassembly, not on the car's age. The full-size body at 200.0 in (5,080 mm) uses about 54 to 56 ft (16.5 to 17 m) of standard cast film, and chrome or patterned film can push that to about 70 ft (21.5 m). A convertible needs extra labor to trim the film against the fabric top, while a sedan needs time to remove and refit roof trim. The condition of the paint also affects the preparation work before the film goes on.

  • Film for a full wrap: about 54 ft (16.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Ambassador wraps by generation

Swipe sideways. Tap a card for the full description.

Rambler Ambassador, first generation, factory photo
Factory color shown

1965–1972 Ambassador convertible, coupe, sedan (first generation)

1965–1972convertible, coupe, sedan (2 or 4 doors)200.0 in (5,080 mm)

On the first generation Rambler Ambassador, the open top changes how the wrap is finished. The fabric top itself is not wrapped, so the film ends exactly where the top begins at the body line. If the car has a folding hard top, those panels are wrapped as separate pieces of their own. This gives a clean edge where the vinyl meets the soft top, and no film is wasted on the top material.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 54 ft (16.5 m) for the convertible to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Ambassador

An Ambassador chrome delete covers the window trim and badges with black film, leaving the paint untouched. A partial wrap can be just the roof, hood, or mirror caps for a smaller change. Paint protection film (PPF) is a clear film that goes on the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be matched to the original color or a new finish.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rambler Ambassador: body, cut-outs and film

A Rambler Ambassador vinyl wrap starts with the body style, and the convertible, coupe, and 2- or 4-door sedan all sit at 200.0 in (5,080 mm) long. This full-size length means every side covers a large flat area, so a standard 60-inch roll gives fewer seams than on a compact car. The convertible and coupe have longer doors than the sedans, which changes how the installer cuts the door sections. The sedans have fixed roof pillars that the film must follow around, while the coupe has a wider rear quarter area.

Ambassador wrap ideas often focus on the chrome, but the body itself has only the side trim inserts of the first generation to remove. Door handles, mirrors, and the front grille surround come off for a clean edge on a full color change wrap. On the convertible, the fabric top is not wrapped, so the film must be trimmed exactly where the top meets the body. Badges and side moldings should be taken off and reapplied so the film does not bridge over them.

To know how much vinyl to wrap an Ambassador, check the body style against the film estimate. The convertible takes about 54 ft (16.5 m), and the sedan takes about 56 ft (17 m) with 60-inch (1.52 m) cast film. That two-foot difference comes from the sedan's roof and the extra area around its fixed rear window. The coupe is not listed separately in the catalog, so a coupe owner should measure or start from the sedan figure.

More Rambler wraps

Questions about wrapping a Rambler Ambassador

How much vinyl does it take to wrap a Rambler Ambassador?

A full wrap of a Rambler Ambassador takes about 54 ft (16.5 m) for the convertible to 56 ft (17 m) for the sedan using 60-inch (1.52 m) cast film. These figures come from the first generation body that is 200.0 in (5,080 mm) long. If you choose chrome or patterned film, plan for up to about 70 ft (21.5 m).

Is the top of an Ambassador wrapped?

No, the fabric top of an Ambassador is not wrapped, so the film ends where the top begins. On a convertible, the folding hard top would be wrapped as its own panel, but the soft top stays bare. This keeps the wrap edge clean and avoids wasting film on a surface that flexes constantly.

Which Ambassador body takes more film?

The sedan body takes more film than the convertible, about 56 ft (17 m) against about 54 ft (16.5 m) with 60-inch cast film. That is because the sedan has a fixed roof and rear window area that the convertible lacks. The coupe body sits between them in practical use, but it is not listed separately in the catalog.

Can I wrap only the hood or the roof of an Ambassador?

Yes, you can wrap only the hood or the roof of an Ambassador as a partial wrap. A chrome delete on the window trim and badges is another smaller job that changes the look without covering the whole body. Clear paint protection film can also be put just on the front end for chip protection.