Wraps by car

Reliant Scimitar Sabre wrap

The Reliant Scimitar Sabre wrap page covers the first generation convertible produced from 1984 to 1992. A full vinyl wrap of this sports car takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. For a chrome or patterned film, plan on about 46 ft (14 m).

1generations11 mof film for a full wrap

Reliant Scimitar Sabre, first generation, factory photo
Reliant Scimitar Sabre, first generation. Factory color shown.

Reliant Scimitar Sabre wrap colors and ideas

  • Scimitar Sabre black wrap
  • Scimitar Sabre white wrap
  • Scimitar Sabre gray wrap
  • Scimitar Sabre silver wrap
  • Scimitar Sabre red wrap
  • Scimitar Sabre blue wrap
  • Scimitar Sabre green wrap
  • Scimitar Sabre yellow wrap
  • Scimitar Sabre orange wrap
  • Scimitar Sabre purple wrap
  • Scimitar Sabre pink wrap
  • Scimitar Sabre teal wrap
  • Scimitar Sabre brown wrap
  • Scimitar Sabre gold wrap
  • Scimitar Sabre chrome wrap
  • Scimitar Sabre color shift wrap
  • Scimitar Sabre carbon fiber wrap
  • Scimitar Sabre camo and patterned wrap

How much vinyl to wrap a Reliant Scimitar Sabre

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1992convertible (2 doors)153.1 in (3,890 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Scimitar Sabre wrap cost factors

Scimitar Sabre wrap cost depends on the size of the car, the film chosen, and the amount of disassembly. The car is short at 153.1 in (3,890 mm), so it uses less material than a longer vehicle. A chrome or patterned film requires about 46 ft (14 m), which raises material cost over a standard color film. The simple two-door body reduces labor compared with a four-door car, but the convertible top edges add detail work.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Scimitar Sabre wraps by generation

Swipe sideways. Tap a card for the full description.

Reliant Scimitar Sabre, first generation, factory photo
Factory color shown

1984–1992 Scimitar Sabre convertible (first generation)

1984–1992convertible (2 doors)153.1 in (3,890 mm)

The first generation Reliant Scimitar Sabre has an open top that is not wrapped in vinyl. The film ends where the fabric top begins, at the beltline around the body. A folding hard top, if fitted, is wrapped as separate panels of its own. The installer tucks the film neatly under the top seals for a finished edge.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Scimitar Sabre

Scimitar Sabre chrome delete covers the window trim and badges with black film. A partial wrap can include the hood, mirror caps, and rear deck. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use much less film than a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Reliant Scimitar Sabre: body, cut-outs and film

A Reliant Scimitar Sabre vinyl wrap must handle a compact convertible body of 153.1 in (3,890 mm) in length. The two-door style means there are no rear door seams to work around. The short overall length keeps material needs modest compared with larger cars. The open top changes how the film is finished at the beltline.

Scimitar Sabre wrap ideas start with the convertible body, where the fabric top is not wrapped and the film ends where the top begins. If the car has a folding hard top, that panel is wrapped separately from the body. The door handles, badges, and trim pieces need cut-outs or removal for a clean install. The front and rear bumpers are integrated and are wrapped as part of the body panels.

How much vinyl to wrap a Scimitar Sabre depends on the film width and the film type you choose. The factory body requires about 36 ft (11 m) of standard cast film. A chrome or patterned film needs more material, about 46 ft (14 m), to match the pattern direction. The convertible top is not covered, so no extra film is needed there.

Questions about wrapping a Reliant Scimitar Sabre

How much vinyl does it take to wrap a Reliant Scimitar Sabre?

A Reliant Scimitar Sabre takes about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film requires more, about 46 ft (14 m). These figures are for the first generation convertible body made from 1984 to 1992.

Is the top of a Scimitar Sabre wrapped?

No, the top of a Scimitar Sabre is not wrapped. The fabric top is left uncovered, and the film ends where the top begins. A folding hard top, if fitted, is wrapped as separate panels of its own.

Can I wrap only the hood or the roof of a Scimitar Sabre?

Yes, you can wrap only the hood, mirror caps, or rear deck of a Scimitar Sabre. These are common partial wrap areas on the two-door convertible. A chrome delete on the window trim and badges is another option with a small amount of film.

Is a Scimitar Sabre hard to wrap?

Yes, a Scimitar Sabre is relatively easy to wrap because it is small and has only two doors. The compact body of 153.1 in (3,890 mm) means fewer large flat panels to stretch film over. The main challenge is the convertible top edge, where the film must be trimmed precisely. The badges and trim pieces still need cut-outs or removal.