Wraps by car

Renaissance Tropica Roadster wrap

The Renaissance Tropica Roadster wrap covers this short-run electric sports car from its single 1995 production year. A full vinyl wrap of the convertible body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The catalog lists one generation for the Tropica Roadster.

1generations11.5 mof film for a full wrap

Renaissance Tropica Roadster, first generation, factory photo
Renaissance Tropica Roadster, first generation. Factory color shown.

Renaissance Tropica Roadster wrap colors and ideas

  • Tropica Roadster black wrap
  • Tropica Roadster white wrap
  • Tropica Roadster gray wrap
  • Tropica Roadster silver wrap
  • Tropica Roadster red wrap
  • Tropica Roadster blue wrap
  • Tropica Roadster green wrap
  • Tropica Roadster yellow wrap
  • Tropica Roadster orange wrap
  • Tropica Roadster purple wrap
  • Tropica Roadster pink wrap
  • Tropica Roadster teal wrap
  • Tropica Roadster brown wrap
  • Tropica Roadster gold wrap
  • Tropica Roadster chrome wrap
  • Tropica Roadster color shift wrap
  • Tropica Roadster carbon fiber wrap
  • Tropica Roadster camo and patterned wrap

How much vinyl to wrap a Renaissance Tropica Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–1995convertible (2 doors)156.0 in (3,962 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Tropica Roadster wrap cost factors

Tropica Roadster wrap cost reflects the single body size of 156.0 in (3,962 mm) and the film amount for that shape. A shop that quotes by the square foot will use the 38 ft (11.5 m) cast film figure as a starting point. Chrome and patterned films add material, and the charge port cut-out adds labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Tropica Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

Renaissance Tropica Roadster, first generation, factory photo
Factory color shown

1995–1995 Tropica Roadster convertible (first generation)

1995–1995convertible (2 doors)156.0 in (3,962 mm)

The open top of the first generation Tropica Roadster is not covered with film. A fabric convertible top is left as it is, and the vinyl ends where the top meets the body. If the car had a folding hard top, that top would be wrapped as its own set of panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Tropica Roadster

Partial wrap jobs on a Tropica Roadster can stop at the hood, mirror caps, or rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) puts a clear layer on the front end without changing the color.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Renaissance Tropica Roadster: body, cut-outs and film

A Renaissance Tropica Roadster vinyl wrap has to follow the compact 156.0 in (3,962 mm) convertible shell. The two-door body uses less film than a sedan of the same era. The fabric top is not wrapped, so the film ends cleanly where the top begins.

Tropica Roadster wrap ideas work best when they plan for the cut-outs and removable parts. The charge port door gets its own small piece of film so the door still opens. The fabric top stays unwrapped and marks the upper edge of the body panels.

How much vinyl to wrap a Tropica Roadster depends on the film type and the installer's waste factor. The base estimate is about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan on roughly 48 ft (14.5 m) to match the pattern direction.

Questions about wrapping a Renaissance Tropica Roadster

How much vinyl does it take to wrap a Renaissance Tropica Roadster?

A full wrap of a Renaissance Tropica Roadster takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body listed in the catalog. Chrome or patterned film raises the amount to about 48 ft (14.5 m).

Is the top of a Tropica Roadster wrapped?

No, the top of a Tropica Roadster is not wrapped because it is a fabric convertible top. The film ends where the top begins on the body. If the car had a folding hard top, that panel would be wrapped separately.

Can I wrap only the hood or the roof of a Tropica Roadster?

Yes, you can wrap only the hood of a Tropica Roadster. A partial wrap can also cover the mirror caps and the rear deck. The roof is not wrapped because the top is fabric.

Is a Tropica Roadster hard to wrap?

A Tropica Roadster adds a few steps compared with a fixed-roof car. The charge port door must be cut out and wrapped as its own piece. The short 156.0 in (3,962 mm) body uses less film, but the convertible top edge needs a clean line.