Wraps by car

Rinspeed Chopster wrap

The Rinspeed Chopster wrap page covers the one-generation Rinspeed Chopster, produced in 2005. A full vinyl wrap of this SUV body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The page covers the body, the film estimate, and the jobs smaller than a full wrap.

1generations20.5 mof film for a full wrap

Rinspeed Chopster, first generation, factory photo
Rinspeed Chopster, first generation. Factory color shown.

Rinspeed Chopster wrap colors and ideas

  • Chopster black wrap
  • Chopster white wrap
  • Chopster gray wrap
  • Chopster silver wrap
  • Chopster red wrap
  • Chopster blue wrap
  • Chopster green wrap
  • Chopster yellow wrap
  • Chopster orange wrap
  • Chopster purple wrap
  • Chopster pink wrap
  • Chopster teal wrap
  • Chopster brown wrap
  • Chopster gold wrap
  • Chopster chrome wrap
  • Chopster color shift wrap
  • Chopster carbon fiber wrap
  • Chopster camo and patterned wrap

How much vinyl to wrap a Rinspeed Chopster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2005SUV (5 doors)192.8 in (4,898 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Chopster wrap cost factors

Chopster wrap cost depends on the size of the body and the film you choose. The SUV body is 192.8 in (4,898 mm) long and takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 76 ft (23 m), which adds material. A partial wrap or a chrome delete costs less than a full wrap because it uses less film.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Chopster wraps by generation

Swipe sideways. Tap a card for the full description.

Rinspeed Chopster, first generation, factory photo
Factory color shown

2005–2005 Chopster SUV (first generation)

2005–2005SUV (5 doors)192.8 in (4,898 mm)

The first generation Rinspeed Chopster was produced in 2005 as a five-door SUV. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the film will lift old paint when it is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Chopster

A partial wrap on the Rinspeed Chopster can cover the roof, the hood, or the mirror caps. A Chopster chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film for the front end of the Chopster.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rinspeed Chopster: body, cut-outs and film

A Rinspeed Chopster vinyl wrap starts with a five-door SUV body that is 192.8 in (4,898 mm) long. The tall panels and the tailgate add surface area, so the film estimate is about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The five doors mean the installer works around four side doors and the tailgate.

Chopster wrap ideas include a color change wrap, a partial wrap, or a chrome delete. The tailgate has the rear glass in it, so the film ends at the edge of the glass. For a chrome delete, the window trim and badges are the parts to cover with black film.

To know how much vinyl to wrap a Chopster, use the estimate of about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 76 ft (23 m) because the pattern must be matched. The Chopster was produced only in 2005, so there is one body to measure.

Questions about wrapping a Rinspeed Chopster

How much vinyl does it take to wrap a Rinspeed Chopster?

How much vinyl does it take to wrap a Rinspeed Chopster? A full wrap takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 76 ft (23 m) because of pattern matching.

Can I wrap only the hood or the roof of a Chopster?

Can I wrap only the hood or the roof of a Chopster? Yes, a partial wrap can cover the roof, the hood, or the mirror caps. The installer cuts the film for that panel and leaves the rest of the body unwrapped.

Is a Chopster hard to wrap?

Is a Chopster hard to wrap? Yes, the Chopster adds work because the tailgate has the rear glass in it, so the film ends at the edge of the glass. The SUV body is 192.8 in (4,898 mm) long, so the installer handles large panels.

How many generations of the Chopster does this page cover?

How many generations of the Chopster does this page cover? This page covers one generation of the Chopster. The Chopster was produced in 2005 and the page uses the body of that generation.