Wraps by car

Saleen S7 wrap

The Saleen S7 wrap page covers the first generation coupe produced from 2000 to 2006. A full vinyl wrap of this wide American sports car takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 54 ft (16.5 m). This guide explains the wrap process, film amounts, and smaller jobs.

1generations14.5 mof film for a full wrap

Saleen S7, first generation, factory photo
Saleen S7, first generation. Factory color shown.

Saleen S7 wrap colors and ideas

  • Saleen S7 black wrap
  • Saleen S7 white wrap
  • Saleen S7 gray wrap
  • Saleen S7 silver wrap
  • Saleen S7 red wrap
  • Saleen S7 blue wrap
  • Saleen S7 green wrap
  • Saleen S7 yellow wrap
  • Saleen S7 orange wrap
  • Saleen S7 purple wrap
  • Saleen S7 pink wrap
  • Saleen S7 teal wrap
  • Saleen S7 brown wrap
  • Saleen S7 gold wrap
  • Saleen S7 chrome wrap
  • Saleen S7 color shift wrap
  • Saleen S7 carbon fiber wrap
  • Saleen S7 camo and patterned wrap

How much vinyl to wrap a Saleen S7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2006coupe (2 doors)188.0 in (4,775 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Saleen S7 wrap cost factors

Saleen S7 wrap cost depends on the amount of film and the time the body takes. The car needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 54 ft (16.5 m) for chrome or patterned film. A wrap shop also charges for the two long side doors, each one large piece of film. The paint condition on a car of these years can add prep work before the wrap.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Saleen S7 wraps by generation

Swipe sideways. Tap a card for the full description.

Saleen S7, first generation, factory photo
Factory color shown

2000–2006 Saleen S7 coupe (first generation)

2000–2006coupe (2 doors)188.0 in (4,775 mm)

The first generation Saleen S7 ran from 2000 to 2006 as a two-door coupe. On a car of these years the paint may be original or repainted, so a test spot comes before a full wrap. A vinyl installer checks adhesion on a small area first. The 188.0 in (4,775 mm) body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Saleen S7

A partial wrap on a Saleen S7 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Saleen S7: body, cut-outs and film

The Saleen S7 vinyl wrap follows the low coupe body with two long side doors. The car is 188.0 in (4,775 mm) long, so a full wrap needs large uncut pieces. Each door is wrapped as one large piece of film. The wide rear haunches and curved nose add time to the installation.

Saleen S7 wrap ideas start with the side doors, because each door takes one large piece of film. The door handles, side mirrors, and front grille come off or are cut out. The rear lights and the engine cover vents need careful trimming. The low front splitter is often wrapped with the bumper as one piece.

To know how much vinyl to wrap a Saleen S7, count one generation only. This page covers the first generation coupe from 2000 to 2006. There is no earlier or later body to compare film use with. A full wrap of this generation takes about 48 ft (14.5 m) of 60-inch (1.52 m) film.

Questions about wrapping a Saleen S7

How much vinyl does it take to wrap a Saleen S7?

A Saleen S7 full wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the amount rises to about 54 ft (16.5 m). These figures are for the coupe produced from 2000 to 2006. Shops add a little extra for the long side doors.

Can I wrap only the hood or the roof of a Saleen S7?

Yes, you can wrap only the hood or the roof of a Saleen S7. A partial wrap on this car covers the roof, hood, or mirror caps as separate jobs. For the hood, a single sheet of film is cut to follow the low nose. The roof is a straightforward panel between the doors.

Is a Saleen S7 hard to wrap?

A Saleen S7 is not hard to wrap, but it adds work. The two long side doors each take one large piece of film, which needs two installers. The 188.0 in (4,775 mm) body has few cut lines, but the curved rear quarters need heat and stretching. The low front splitter and side intakes call for careful trimming.

How many generations of the Saleen S7 does this page cover?

This page covers one generation of the Saleen S7. The first generation coupe was produced from 2000 to 2006. There are no other generations in this catalog.