Wraps by car

Santana PS-10 wrap

The Santana PS-10 wrap page covers the first generation made from 2007 to 2011. This model came as an SUV or a pickup with two, three, or five doors. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) for the pickup to 67 ft (20.5 m) for the SUV using 60-inch (1.52 m) cast film. Chrome or patterned film can raise that to about 77 ft (23.5 m).

1generations20.5 mof film for a full wrap

Santana PS-10, first generation, factory photo
Santana PS-10, first generation. Factory color shown.

Santana PS-10 wrap colors and ideas

  • Santana PS-10 black wrap
  • Santana PS-10 white wrap
  • Santana PS-10 gray wrap
  • Santana PS-10 silver wrap
  • Santana PS-10 red wrap
  • Santana PS-10 blue wrap
  • Santana PS-10 green wrap
  • Santana PS-10 yellow wrap
  • Santana PS-10 orange wrap
  • Santana PS-10 purple wrap
  • Santana PS-10 pink wrap
  • Santana PS-10 teal wrap
  • Santana PS-10 brown wrap
  • Santana PS-10 gold wrap
  • Santana PS-10 chrome wrap
  • Santana PS-10 color shift wrap
  • Santana PS-10 carbon fiber wrap
  • Santana PS-10 camo and patterned wrap

How much vinyl to wrap a Santana PS-10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2011SUV, pickup (2 or 3 or 5 doors)166.5 in (4,228 mm) to 185.8 in (4,720 mm)about 57 ft (17.5 m) for the pickup to 67 ft (20.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Santana PS-10 wrap cost factors

A Santana PS-10 wrap cost depends on the body style, the film type, and the labor for the tall body. The pickup needs about 57 ft (17.5 m) of film, while the SUV needs about 67 ft (20.5 m) with 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 77 ft (23.5 m), which adds cost. The tall body at 78.7 in (2,000 mm) means extra time on a platform for the roof.

  • Film for a full wrap: about 57 ft (17.5 m) for the pickup to 67 ft (20.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).
  • Body: SUV, pickup (2 or 3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (78.7 in (2,000 mm)): the roof is wrapped from a platform.

Santana PS-10 wraps by generation

Swipe sideways. Tap a card for the full description.

Santana PS-10, first generation, factory photo
Factory color shown

2007–2011 Santana PS-10 SUV, pickup (first generation)

2007–2011SUV, pickup (2 or 3 or 5 doors)166.5 in (4,228 mm) to 185.8 in (4,720 mm)

The first-generation Santana PS-10 from 2007 to 2011 includes a pickup bed that changes how the film is applied. The cab and the bed are two bodies for the film, and the inside of the bed stays bare. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The tall body means the roof is wrapped from a platform.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (78.7 in (2,000 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) for the pickup to 67 ft (20.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Santana PS-10

A partial wrap on a Santana PS-10 can cover the roof, hood, or mirror caps. Santana PS-10 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Santana PS-10: body, cut-outs and film

A Santana PS-10 vinyl wrap has to follow the body styles and size of the truck. The body runs from 166.5 in (4,228 mm) to 185.8 in (4,720 mm) long and stands 78.7 in (2,000 mm) tall. That height means the roof is wrapped from a platform. The wrap film is cut to fit the SUV or pickup body, but the pickup bed is treated as a separate surface.

Santana PS-10 wrap ideas start with the parts that need cut-outs or come off. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The pickup bed is wrapped as two bodies: the cab and the bed, while the inside of the bed stays bare. The tall body also means working on the roof from a platform.

How much vinyl to wrap a Santana PS-10 depends on the body style you have. The pickup takes about 57 ft (17.5 m) and the SUV takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for up to about 77 ft (23.5 m). Since there is only one generation in the catalog, the film amounts stay the same across the 2007 to 2011 run.

Questions about wrapping a Santana PS-10

How much vinyl does it take to wrap a Santana PS-10?

A Santana PS-10 takes about 57 ft (17.5 m) for the pickup to 67 ft (20.5 m) for the SUV with 60-inch (1.52 m) cast film. The amount you need depends on the body style of the newest body in the catalog. Chrome or patterned film can take up to about 77 ft (23.5 m). This figure does not include the inside of the pickup bed.

Is the bed of a Santana PS-10 wrapped?

No, the bed of a Santana PS-10 pickup is not wrapped on the inside. The cab and the bed are wrapped as two bodies, but the inside of the bed stays bare. Only the exterior surfaces of the bed are covered. This keeps the bed usable for cargo without damaging the film.

Which Santana PS-10 body takes more film?

The SUV body of the Santana PS-10 takes more film than the pickup. The SUV needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film, while the pickup needs about 57 ft (17.5 m). The SUV has a full enclosed body, so there is more surface area to cover. The pickup bed is treated separately and the inside is not wrapped.

Can I wrap only the hood or the roof of a Santana PS-10?

Yes, you can wrap only the hood or the roof of a Santana PS-10. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete is another option that covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.