Wraps by car

Skoda Yeti wrap

The Skoda Yeti wrap page covers the single-generation SUV built from 2009 to 2018. A full vinyl wrap of this body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 64 ft (19.5 m) of the same width film.

1generations17.5 mof film for a full wrap

Skoda Yeti, first generation, factory photo
Skoda Yeti, first generation. Factory color shown.

Skoda Yeti wrap colors and ideas

  • Yeti black wrap
  • Yeti white wrap
  • Yeti gray wrap
  • Yeti silver wrap
  • Yeti red wrap
  • Yeti blue wrap
  • Yeti green wrap
  • Yeti yellow wrap
  • Yeti orange wrap
  • Yeti purple wrap
  • Yeti pink wrap
  • Yeti teal wrap
  • Yeti brown wrap
  • Yeti gold wrap
  • Yeti chrome wrap
  • Yeti color shift wrap
  • Yeti carbon fiber wrap
  • Yeti camo and patterned wrap

How much vinyl to wrap a Skoda Yeti

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2018SUV (5 doors)166.2 in (4,222 mm) to 166.3 in (4,223 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Yeti wrap cost factors

Yeti wrap cost depends on the size of the car, the film chosen, and the prep work the body needs. A full wrap uses about 57 ft (17.5 m) of cast film, while chrome or patterned film adds roughly 7 ft (2 m). Removing roof rails or wrapping around sensors and fog lamps increases labor time.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Yeti wraps by generation

Swipe sideways. Tap a card for the full description.

Skoda Yeti, first generation, factory photo
Factory color shown

2009–2018 Yeti SUV (first generation)

2009–2018SUV (5 doors)166.2 in (4,222 mm) to 166.3 in (4,223 mm)

The first generation Skoda Yeti stayed in production from 2009 to 2018. A restyling in 2013 gave the car new bumpers and lights. That means a template or pre-cut film kit made for the earlier version will not match the later one.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Yeti

A Yeti chrome delete covers window trim, decorative moldings, and badges with black film. A partial wrap can include the roof, hood, and mirror caps only. Paint protection film (PPF) is clear film that can be applied to the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Skoda Yeti: body, cut-outs and film

The Skoda Yeti vinyl wrap covers an SUV body with five doors and a length of 166.2 in (4,222 mm) to 166.3 in (4,223 mm). The upright sides and short rear overhang make this car a manageable wrap project. The large roof and tall tailgate are the main flat areas, while the bumpers and wheel arches need more stretching.

Yeti wrap ideas start with the tailgate, where the rear glass is set into the panel and the film ends at its edge. Some trims have roof rails that should come off before the roof is wrapped, or the film must be cut along them. Bright decorative moldings on some trims stay visible next to the film unless a chrome delete is added. Parking sensors in the bumpers and fog lamps in the front bumper require careful cut-outs.

When you work out how much vinyl to wrap a Yeti, the only generation spans 2009 to 2018. The restyling in 2013 changed the bumpers and lights, so film cut for one version does not fit the other. A full wrap of the later body still takes about 57 ft (17.5 m) of 60-inch film.

Questions about wrapping a Skoda Yeti

How much vinyl does it take to wrap a Skoda Yeti?

A full Skoda Yeti wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, plan for about 64 ft (19.5 m). The car is 166.2 in (4,222 mm) to 166.3 in (4,223 mm) long.

Which years of the Yeti take the same film cuts?

The Skoda Yeti was built from 2009 to 2018, and the restyling in 2013 changed the bumpers and lights. Pre-cut film for 2009 to 2013 models will not fit the 2013 to 2018 versions. For custom-cut film, every year can be wrapped.

Can I wrap only the hood or the roof of a Yeti?

Yes, you can wrap only the hood or the roof of a Yeti. A partial wrap often includes the roof, hood, and mirror caps. Chrome delete on the window trim and badges is another small job.

Is a Yeti hard to wrap?

A Yeti is not hard to wrap, but a few details add work. The tailgate needs care because the film ends at the edge of the rear glass. Roof rails, parking sensors, and fog lamps mean extra cutting or removal.