Choose the finish first: matte mutes reflections, satin gives a soft sheen, and gloss adds depth to a Forfour wrapped in gray. Then pick a film line, because a color change wrap is paint-like film applied over the original paint. Full wraps cover the door jambs only if you open the doors and film the inner edges too. A gray color change on the Forfour also works as a two-tone design with black accents.

Every film seam on a Forfour follows a body line or a panel edge, not a flat open area. The factory paint must be clean and smooth, because chips or peeling clear coat show through the film. On a small car the tailgate and rear glass sit close, so the film ends at the glass edge. Seams on the bumpers run along the natural cut lines of the plastic.

A wrapped Forfour is removable by a shop, and the film pulls off without leaving adhesive when it is lifted with heat. Wash it by hand with a soft mitt and a pH-neutral soap, never with a pressure washer close to an edge. The wrap does not need wax, but a spray sealant made for film helps dirt slide off. The film is a physical layer over the paint, so it protects the original finish from light scuffs.