Wraps by car

Spectre R42 wrap

This page covers a Spectre R42 wrap with a vinyl wrap on the first generation. The Spectre R42 is a sports car built from 1996 to 1997 in a single generation. A full wrap of the coupe body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 52 ft (16 m).

1generations13 mof film for a full wrap

Spectre R42, first generation, factory photo
Spectre R42, first generation. Factory color shown.

Spectre R42 wrap colors and ideas

  • Spectre R42 black wrap
  • Spectre R42 white wrap
  • Spectre R42 gray wrap
  • Spectre R42 silver wrap
  • Spectre R42 red wrap
  • Spectre R42 blue wrap
  • Spectre R42 green wrap
  • Spectre R42 yellow wrap
  • Spectre R42 orange wrap
  • Spectre R42 purple wrap
  • Spectre R42 pink wrap
  • Spectre R42 teal wrap
  • Spectre R42 brown wrap
  • Spectre R42 gold wrap
  • Spectre R42 chrome wrap
  • Spectre R42 color shift wrap
  • Spectre R42 carbon fiber wrap
  • Spectre R42 camo and patterned wrap

How much vinyl to wrap a Spectre R42

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–1997coupe (2 doors)165.0 in (4,190 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Spectre R42 wrap cost factors

The Spectre R42 wrap cost depends on the film type and the amount of film the body needs. A full wrap uses about 43 ft (13 m) of 60-inch cast film, while chrome or patterned film raises that to about 52 ft (16 m). Installation time is also affected by the two long side doors, which are wrapped as single large pieces. The small size of the car at 165.0 in (4,190 mm) keeps the total film area modest.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Spectre R42 wraps by generation

Swipe sideways. Tap a card for the full description.

Spectre R42, first generation, factory photo
Factory color shown

1996–1997 Spectre R42 coupe (first generation)

1996–1997coupe (2 doors)165.0 in (4,190 mm)

The first generation Spectre R42 was built in 1996 and 1997. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A test spot checks how the film adheres to the paint on a small area. After the test spot, the installer can decide on the full wrap.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Spectre R42

Partial wrap options for a Spectre R42 include the roof, hood, and mirror caps. A Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Spectre R42: body, cut-outs and film

A Spectre R42 vinyl wrap on this coupe is shaped by the two long side doors. Each door is one large piece of film, so the installer has fewer seams to manage. The body is 165.0 in (4,190 mm) long, which keeps the side panels within a standard film width. The two-door coupe style means only the doors, roof, hood, and bumpers need film.

Spectre R42 wrap ideas start with the two long side doors as single panels. The doors are the main large surfaces, so any cut-out around handles or locks is minimal. The car has no roof rails or large trims that require removal. A clean coupe shape lets the film wrap around the edges without many relief cuts.

How much vinyl to wrap a Spectre R42 depends on the generation covered here. This page covers one generation, produced from 1996 to 1997, so the body is the same across those years. The film estimate of about 43 ft (13 m) applies to every coupe in that range. If you use chrome or patterned film, plan for about 52 ft (16 m).

Questions about wrapping a Spectre R42

How much vinyl does it take to wrap a Spectre R42?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Spectre R42. For chrome or patterned film, the estimate is about 52 ft (16 m). These figures are for a full wrap of the coupe body.

Can I wrap only the hood or the roof of a Spectre R42?

Yes, you can wrap only the hood or the roof of a Spectre R42. The partial wrap options include the hood, roof, and mirror caps. You can also choose a chrome delete on the window trim and badges or paint protection film on the front end.

Is a Spectre R42 hard to wrap?

The Spectre R42 is not especially hard to wrap, but the two long side doors add some work. Each door is one large piece of film, which requires careful handling to avoid creases. The car's small size of 165.0 in (4,190 mm) means there is less film to manage overall. The main challenge is getting the large door panels aligned without seams.

How many generations of the Spectre R42 does this page cover?

This page covers one generation of the Spectre R42. The first generation was produced from 1996 to 1997. There are no other generations in the catalog.