Wraps by car

Spyker C12 wrap

The Spyker C12 wrap page covers the first generation sports car produced from 2006 to 2008. This one-generation car was built as a convertible and a coupe. A full wrap of the newest body takes about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe using 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Spyker C12, first generation, factory photo
Spyker C12, first generation. Factory color shown.

Spyker C12 wrap colors and ideas

  • Spyker C12 black wrap
  • Spyker C12 white wrap
  • Spyker C12 gray wrap
  • Spyker C12 silver wrap
  • Spyker C12 red wrap
  • Spyker C12 blue wrap
  • Spyker C12 green wrap
  • Spyker C12 yellow wrap
  • Spyker C12 orange wrap
  • Spyker C12 purple wrap
  • Spyker C12 pink wrap
  • Spyker C12 teal wrap
  • Spyker C12 brown wrap
  • Spyker C12 gold wrap
  • Spyker C12 chrome wrap
  • Spyker C12 color shift wrap
  • Spyker C12 carbon fiber wrap
  • Spyker C12 camo and patterned wrap

How much vinyl to wrap a Spyker C12

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2008convertible, coupe (2 doors)177.4 in (4,505 mm) to 180.5 in (4,585 mm)about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Spyker C12 wrap cost factors

The Spyker C12 wrap cost depends mostly on the body style, the film chosen, and the condition of the paint. The coupe uses about 51 ft (15.5 m) of film, while the convertible needs about 43 ft (13 m). A chrome or patterned film can raise the film estimate to about 57 ft (17.5 m). The two long side doors and the absence of rear doors keep the labor estimate consistent.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Spyker C12 wraps by generation

Swipe sideways. Tap a card for the full description.

Spyker C12, first generation, factory photo
Factory color shown

2006–2008 Spyker C12 convertible, coupe (first generation)

2006–2008convertible, coupe (2 doors)177.4 in (4,505 mm) to 180.5 in (4,585 mm)

The first generation Spyker C12 covers an open top that is not wrapped when the top is fabric, so the film ends where the fabric begins. A folding hard top on some trims is wrapped as its own set of panels. The installer must align the film edge carefully along the top of the windshield and the side windows. The long side doors each get one large piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Spyker C12

A partial wrap on a Spyker C12 can cover the roof, the hood, or the mirror caps without committing to a full wrap. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is offered as clear film on the front end. These smaller jobs change the amount of film from the full wrap estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Spyker C12: body, cut-outs and film

The Spyker C12 vinyl wrap must be planned around two body styles and a length of 177.4 in (4,505 mm) to 180.5 in (4,585 mm). The convertible and coupe both have two long side doors, so each door needs one large piece of film. The overall size is modest for a sports car, which keeps the wrap manageable. The two-door layout removes the need to wrap rear door edges.

Spyker C12 wrap ideas include a convertible top that is left uncovered, so the film ends where the fabric begins. A folding hard top on some trims is wrapped as its own separate panels. The two long side doors are each covered with a single large piece of film. The side mirrors should be removed or wrapped with a separate small piece.

How much vinyl to wrap a Spyker C12 depends on the one generation offered from 2006 to 2008. The first generation uses about 43 ft (13 m) for the convertible and 51 ft (15.5 m) for the coupe. That difference comes from the larger roof and rear deck of the coupe. Chrome or patterned film can push the estimate up to about 57 ft (17.5 m).

More Spyker wraps

Questions about wrapping a Spyker C12

How much vinyl does it take to wrap a Spyker C12?

A Spyker C12 takes about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe using 60-inch (1.52 m) cast film. The figure comes from the first generation body style and assumes a full wrap. Chrome or patterned film can increase the estimate to about 57 ft (17.5 m).

Is the top of a Spyker C12 wrapped?

No, the fabric top of a Spyker C12 convertible is not wrapped because the film would not adhere properly to the soft material. A folding hard top on some trims is wrapped as its own separate panels. The film ends cleanly where the fabric top begins.

Which Spyker C12 body takes more film?

The Spyker C12 coupe takes more film than the convertible. The coupe needs about 51 ft (15.5 m) while the convertible needs about 43 ft (13 m). The difference comes from the roof and rear deck of the coupe.

Can I wrap only the hood or the roof of a Spyker C12?

Yes, you can wrap only the hood or the roof of a Spyker C12 as a partial wrap. Mirror caps, chrome delete on window trim and badges, and clear paint protection film on the front end are also possible. These smaller jobs use less film than a full wrap.