Wraps by car

Standard Fourteen wrap

The Standard Fourteen wrap page covers the single generation produced from 1945 to 1948. This generation includes the sedan body style with four doors. A full vinyl wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Standard Fourteen, first generation, factory photo
Standard Fourteen, first generation. Factory color shown.

Standard Fourteen wrap colors and ideas

  • Fourteen black wrap
  • Fourteen white wrap
  • Fourteen gray wrap
  • Fourteen silver wrap
  • Fourteen red wrap
  • Fourteen blue wrap
  • Fourteen green wrap
  • Fourteen yellow wrap
  • Fourteen orange wrap
  • Fourteen purple wrap
  • Fourteen pink wrap
  • Fourteen teal wrap
  • Fourteen brown wrap
  • Fourteen gold wrap
  • Fourteen chrome wrap
  • Fourteen color shift wrap
  • Fourteen carbon fiber wrap
  • Fourteen camo and patterned wrap

How much vinyl to wrap a Standard Fourteen

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1945–1948sedan (4 doors)165.0 in (4,191 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Fourteen wrap cost factors

Fourteen wrap cost depends on the square footage of film and the labor hours. This car needs about 51 ft (15.5 m) of cast film for a full color change. Chrome delete adds material for window trim and badges. Paint protection film on the front end uses a separate clear film.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Fourteen wraps by generation

Swipe sideways. Tap a card for the full description.

Standard Fourteen, first generation, factory photo
Factory color shown

1945–1948 Fourteen sedan (first generation)

1945–1948sedan (4 doors)165.0 in (4,191 mm)

The first generation Standard Fourteen, built from 1945 to 1948, often has original paint or older repaints. A test spot on each panel shows whether the film will lift the finish. The installer checks for rust and bondo before quoting a full wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Fourteen

A partial wrap on a Fourteen can cover the roof, hood, or mirror caps. Chrome delete for this car means covering window trim and badges with black film. Paint protection film (PPF) on the front end adds a clear layer against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Standard Fourteen: body, cut-outs and film

A Standard Fourteen vinyl wrap involves a sedan with four doors and a length of 165.0 in (4,191 mm). The straight sides and defined panel edges give the installer clear terminations. The roof area is the largest single panel on this body.

Fourteen wrap ideas include color change on the main body and chrome delete on the bright trim. The window trim and badges are good candidates for black film. Door handles and mirrors come off for clean edges. The hinged panels need careful cutting around locks and hinges.

How much vinyl to wrap a Fourteen depends on panel count and the film width you buy. The first body, made from 1945 to 1948, is the only one in the catalog. Installers calculate from the film estimate of this body to avoid short rolls.

More Standard wraps

Questions about wrapping a Standard Fourteen

How much vinyl does it take to wrap a Standard Fourteen?

A full wrap of a Standard Fourteen takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the estimate is about 59 ft (18 m) because of waste from matching patterns.

Can I wrap only the hood or the roof of a Fourteen?

Yes, you can wrap only the hood or only the roof. A partial wrap on a Fourteen can cover the roof, hood, or mirror caps as separate jobs.

Is a Fourteen hard to wrap?

A Fourteen is not the easiest car to wrap because of its age and panel condition. The 165.0 in (4,191 mm) sedan body has straight panels but rust and old paint need more prep. The installer has to spend time on test spots and cleaning before the film goes on.

How many generations of the Fourteen does this page cover?

This page covers one generation of the Standard Fourteen. The catalog lists the first generation from 1945 to 1948.