Wraps by car

Stelato S9 wrap

A Stelato S9 wrap covers the large luxury sedan in cast vinyl, and this page covers its first generation from 2024 onward. A full wrap of this body takes about 64 ft (19.5 m) of 60-inch (1.52 m) film. With chrome or patterned film, plan for about 76 ft (23 m).

1generations19.5 mof film for a full wrap

Stelato S9, first generation, factory photo
Stelato S9, first generation. Factory color shown.

Stelato S9 wrap colors and ideas

  • Stelato S9 black wrap
  • Stelato S9 white wrap
  • Stelato S9 gray wrap
  • Stelato S9 silver wrap
  • Stelato S9 red wrap
  • Stelato S9 blue wrap
  • Stelato S9 green wrap
  • Stelato S9 yellow wrap
  • Stelato S9 orange wrap
  • Stelato S9 purple wrap
  • Stelato S9 pink wrap
  • Stelato S9 teal wrap
  • Stelato S9 brown wrap
  • Stelato S9 gold wrap
  • Stelato S9 chrome wrap
  • Stelato S9 color shift wrap
  • Stelato S9 carbon fiber wrap
  • Stelato S9 camo and patterned wrap

How much vinyl to wrap a Stelato S9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowsedan (4 doors)203.1 in (5,160 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Stelato S9 wrap cost factors

Stelato S9 wrap cost depends on the size of the car, the film chosen, and the amount of labor. The sedan is 203.1 in (5,160 mm) long, so it needs more material and more time than a smaller car. A full wrap uses about 64 ft (19.5 m) of standard film, or about 76 ft (23 m) for chrome or patterned film. Removing parts like door handles and mirrors also adds to the work.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: sedan (4 doors).

Stelato S9 wraps by generation

Swipe sideways. Tap a card for the full description.

Stelato S9, first generation, factory photo
Factory color shown

2024–now Stelato S9 sedan (first generation)

2024–nowsedan (4 doors)203.1 in (5,160 mm)

The first-generation Stelato S9 is a long luxury sedan with a simple, smooth body shape. The car is 203.1 in (5,160 mm) long, so you will need about 64 ft (19.5 m) of film for a full color change. Its four-door body has no sharp creases, which helps the film lay flat. This single generation is the only one in this catalog.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Stelato S9

A partial wrap on a Stelato S9 can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Stelato S9: body, cut-outs and film

The Stelato S9 vinyl wrap has to handle a long sedan body of 203.1 in (5,160 mm) with four doors. The large panels and gentle curves make film placement straightforward, but you will use more material than on a compact car. A full wrap covers the roof, hood, trunk, bumpers, and every door.

Stelato S9 wrap ideas start with the standard color change, but consider leaving the roof black for a two-tone look. Window trims and badges are small parts that can be covered with chrome delete film. Door handles and mirrors come off for a clean wrap, and the front bumper needs careful relief cuts around sensors.

How much vinyl to wrap a Stelato S9 depends on the car being in its first generation, built from 2024 onward. There is only one body style, a four-door sedan, so film estimates stay consistent for every car this page covers. You can buy the same amount of film for any 2024 or later S9.

Questions about wrapping a Stelato S9

How much vinyl does it take to wrap a Stelato S9?

A Stelato S9 wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full color change. If you choose chrome or patterned film, plan for about 76 ft (23 m). These figures are for the first-generation sedan body.

Can I wrap only the hood or the roof of a Stelato S9?

Yes, you can wrap just the hood or the roof of a Stelato S9 as a partial wrap. Partial wraps can also include mirror caps, and you can do a chrome delete on the window trim and badges. Paint protection film goes on the front end only.

Is a Stelato S9 hard to wrap?

A Stelato S9 is not especially hard to wrap, but its size adds work. At 203.1 in (5,160 mm) long, there is a lot of surface area to cover and manage. The front bumper has sensors that need relief cuts, and parts like door handles and mirrors come off for a cleaner install.

How many generations of the Stelato S9 does this page cover?

This page covers one generation of the Stelato S9, the first generation built from 2024 onward.