Wraps by car

Studebaker Golden Hawk wrap

The Studebaker Golden Hawk wrap page covers the first generation coupe built from 1956 to 1958. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to about 69 ft (21 m) for the same car.

1generations17 mof film for a full wrap

Studebaker Golden Hawk, first generation, factory photo
Studebaker Golden Hawk, first generation. Factory color shown.

Studebaker Golden Hawk wrap colors and ideas

  • Golden Hawk black wrap
  • Golden Hawk white wrap
  • Golden Hawk gray wrap
  • Golden Hawk silver wrap
  • Golden Hawk red wrap
  • Golden Hawk blue wrap
  • Golden Hawk green wrap
  • Golden Hawk yellow wrap
  • Golden Hawk orange wrap
  • Golden Hawk purple wrap
  • Golden Hawk pink wrap
  • Golden Hawk teal wrap
  • Golden Hawk brown wrap
  • Golden Hawk gold wrap
  • Golden Hawk chrome wrap
  • Golden Hawk color shift wrap
  • Golden Hawk carbon fiber wrap
  • Golden Hawk camo and patterned wrap

How much vinyl to wrap a Studebaker Golden Hawk

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1956–1958coupe (2 doors)203.9 in (5,180 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Golden Hawk wrap cost factors

Golden Hawk wrap cost depends on film choice, paint condition, and the size of the coupe body. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while chrome or patterned film uses about 69 ft (21 m). The two long doors add labor because each is covered with one large sheet.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Golden Hawk wraps by generation

Swipe sideways. Tap a card for the full description.

Studebaker Golden Hawk, first generation, factory photo
Factory color shown

1956–1958 Golden Hawk coupe (first generation)

1956–1958coupe (2 doors)203.9 in (5,180 mm)

The first generation Golden Hawk was built from 1956 to 1958 as a two-door coupe. Paint age varies on a car of these years because panels may be original or repainted. Before a full wrap, a test spot on the paint shows whether the film will stick well.

Two long side doors: each door is one large piece of film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Golden Hawk

A partial wrap on a Studebaker Golden Hawk can cover the roof, hood, or mirror caps. Chrome delete changes the look by covering window trim and badges with black film. Paint protection film (PPF) is clear film placed on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Studebaker Golden Hawk: body, cut-outs and film

The Studebaker Golden Hawk vinyl wrap is planned around a full-size two-door coupe body. The car is 203.9 in (5,180 mm) long, so long roof and side panels need wide rolls of film. Its two long doors are each wrapped as one large piece to avoid seams.

Golden Hawk wrap ideas often start with the two long side doors, which are each one large piece of film. No badges or handles need cut-outs on the doors when they are removed first. The film estimate allows extra material for the long coupe roof and the tail fins.

To know how much vinyl to wrap a Golden Hawk, one generation is enough because the catalog covers only the 1956–1958 coupe. These three production years share one body length of 203.9 in (5,180 mm). A full wrap of any year takes the same 56 ft (17 m) of 60-inch cast film.

More Studebaker wraps

Questions about wrapping a Studebaker Golden Hawk

How much vinyl does it take to wrap a Studebaker Golden Hawk?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Studebaker Golden Hawk. If you use chrome or patterned film, plan on about 69 ft (21 m). These figures are for the coupe body of the 1956–1958 generation.

Can I wrap only the hood or the roof of a Golden Hawk?

Yes, you can wrap only the hood or the roof of a Golden Hawk. A partial wrap on this car may also cover mirror caps. Many owners choose a chrome delete on window trim and badges, or clear paint protection film on the front end.

Is a Golden Hawk hard to wrap?

A Golden Hawk is not especially hard to wrap, but its size adds work. The coupe body is 203.9 in (5,180 mm) long, so large panels need careful handling. Its two long side doors must each be covered with one large piece of film, which takes patience to lay flat.

How many generations of the Golden Hawk does this page cover?

This page covers one generation of the Studebaker Golden Hawk. That generation was built from 1956 to 1958 as a two-door coupe. All body and film figures on this page refer to that single generation.