Wraps by car

Sunshine M2 wrap

A Sunshine M2 wrap covers the mini car in vinyl wrap, giving it a new color or finish in one piece of work. The page covers one generation, the first, produced from 2024 onward. A full wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

1generations11.5 mof film for a full wrap

Sunshine M2, first generation, factory photo
Sunshine M2, first generation. Factory color shown.

Sunshine M2 wrap colors and ideas

  • Sunshine M2 black wrap
  • Sunshine M2 white wrap
  • Sunshine M2 gray wrap
  • Sunshine M2 silver wrap
  • Sunshine M2 red wrap
  • Sunshine M2 blue wrap
  • Sunshine M2 green wrap
  • Sunshine M2 yellow wrap
  • Sunshine M2 orange wrap
  • Sunshine M2 purple wrap
  • Sunshine M2 pink wrap
  • Sunshine M2 teal wrap
  • Sunshine M2 brown wrap
  • Sunshine M2 gold wrap
  • Sunshine M2 chrome wrap
  • Sunshine M2 color shift wrap
  • Sunshine M2 carbon fiber wrap
  • Sunshine M2 camo and patterned wrap

How much vinyl to wrap a Sunshine M2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowhatchback (3 doors)111.4 in (2,830 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Sunshine M2 wrap cost factors

The Sunshine M2 wrap cost depends on the film type, the finish, and the size of the area you wrap. A full color change takes about 38 ft (11.5 m) of 60-inch film, while chrome or patterned film needs about 46 ft (14 m). The installer's labor also varies with the complexity of the panels and any disassembly needed.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Sunshine M2 wraps by generation

Swipe sideways. Tap a card for the full description.

Sunshine M2, first generation, factory photo
Factory color shown

2024–now Sunshine M2 hatchback (first generation)

2024–nowhatchback (3 doors)111.4 in (2,830 mm)

The first generation Sunshine M2 is a small three-door hatchback with a length of 111.4 in (2,830 mm). Its compact size means fewer panels and less film than larger cars, making a full wrap quicker to install. The body has two long doors and a tailgate, which are the main large pieces to cover.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Sunshine M2

A partial wrap on the Sunshine M2 is a good option when you want to change only certain areas like the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film to change the bright accents. Paint protection film (PPF) in clear film can be applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Sunshine M2: body, cut-outs and film

The Sunshine M2 vinyl wrap is a compact job because the car is a three-door hatchback with a length of 111.4 in (2,830 mm). The body has few large panels, which keeps the number of pieces low. The two long side doors each take one large piece of film, so installation is straightforward.

Sunshine M2 wrap ideas should account for the tailgate that includes the rear glass, where the film ends at the edge of the glass. The electric charge port door is wrapped as a small separate piece, a nice detail to consider. The side mirrors and door handles are also wrapped separately, adding small but visible accents.

When counting how much vinyl to wrap a Sunshine M2, remember that only one generation exists in the catalog, from 2024 to now. For a color change, about 38 ft (11.5 m) of 60-inch (1.52 m) cast film is the estimate. If you choose chrome or patterned film, the estimate goes up to about 46 ft (14 m) because of pattern matching and extra coverage.

Questions about wrapping a Sunshine M2

How much vinyl does it take to wrap a Sunshine M2?

About 38 ft (11.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Sunshine M2 in a full color change. This estimate applies to the first generation, which is the only generation covered on this page.

Can I wrap only the hood or the roof of a Sunshine M2?

Yes, you can wrap only the hood or the roof of a Sunshine M2 as a partial wrap. The partial wrap options for this car include the roof, hood, and mirror caps, so a single panel is possible.

Is a Sunshine M2 hard to wrap?

A Sunshine M2 is moderately easy to wrap, but a few details add work. The tailgate includes the rear glass, so the film must be trimmed precisely at the glass edge. The electric charge port door is a small separate piece, and the two long doors each require one large piece of film.

How many generations of the Sunshine M2 does this page cover?

This page covers one generation of the Sunshine M2. The first generation has been produced from 2024 to now, and no earlier generations are in the catalog.