Wraps by car

Tata Nano wrap

The Tata Nano wrap page covers the first generation of this mini car, produced from 2008 to 2015. A full vinyl wrap of the newest Nano body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds to the total, about 51 ft (15.5 m) for a complete wrap.

1generations13.5 mof film for a full wrap

Tata Nano, first generation, factory photo
Tata Nano, first generation. Factory color shown.

Tata Nano wrap colors and ideas

  • Nano black wrap
  • Nano white wrap
  • Nano gray wrap
  • Nano silver wrap
  • Nano red wrap
  • Nano blue wrap
  • Nano green wrap
  • Nano yellow wrap
  • Nano orange wrap
  • Nano purple wrap
  • Nano pink wrap
  • Nano teal wrap
  • Nano brown wrap
  • Nano gold wrap
  • Nano chrome wrap
  • Nano color shift wrap
  • Nano carbon fiber wrap
  • Nano camo and patterned wrap

How much vinyl to wrap a Tata Nano

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2015hatchback (4 doors)124.6 in (3,164 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Nano wrap cost factors

The Nano wrap cost depends on the film chosen, the condition of the paint, and how much disassembly the installer does. The car's small size keeps material needs at about 44 ft (13.5 m), so film quantity is not a large cost driver. Labor for the tailgate cut-out around the rear glass and for the four door handles adds time. Chrome or patterned films cost more than solid colors and require about 51 ft (15.5 m) of film.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Nano wraps by generation

Swipe sideways. Tap a card for the full description.

Tata Nano, first generation, factory photo
Factory color shown

2008–2015 Nano hatchback (first generation)

2008–2015hatchback (4 doors)124.6 in (3,164 mm)

The first generation Tata Nano, built from 2008 to 2015, is a small hatchback with four doors and a tailgate. On a car of these years the paint may be original in some places and repainted in others. An installer should test film adhesion on a small spot before wrapping the whole car. The roof, hood, and door panels vary only slightly between production years, so film patterns remain consistent.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Nano

A partial wrap on the Nano can cover the roof, hood, and mirror caps. A Nano chrome delete changes the window trim and badges to black film, giving the car a sharper look. Paint protection film (PPF), a clear film, can be applied to the front end only, covering the hood and bumper. These smaller jobs use less film than a full wrap and still change the car's appearance.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Tata Nano: body, cut-outs and film

The Tata Nano vinyl wrap follows the car's simple hatchback shape and four doors. At 124.6 in (3,164 mm) long, the car is short, so film installers work with fewer large panels than on longer vehicles. The four doors and hatchback tailgate are the main flat areas, making the wrap layout straightforward.

Nano wrap ideas often start with the tailgate, where the film must end at the edge of the rear glass built into it. The door handles, badges, and window trim can stay on the car, but precise cut-outs around them take time. Wrapping the tailgate as one panel is possible, but the installer will trim carefully around the glass.

When figuring how much vinyl to wrap a Nano, use the estimate for the only generation: about 44 ft (13.5 m) of 60-inch film. This amount covers the full body, including the front and rear bumpers. The car's small size means that even with some waste at the edges, the total stays close to that figure.

Questions about wrapping a Tata Nano

How much vinyl does it take to wrap a Tata Nano?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Tata Nano. If you choose a chrome or patterned film, plan for about 51 ft (15.5 m). These figures cover the full body of the only generation of this car.

Can I wrap only the hood or the roof of a Nano?

Yes, you can wrap only the hood or the roof of a Nano. A partial wrap of the roof, hood, and mirror caps is a standard service. The tailgate can also be wrapped alone, with the film ending at the edge of the rear glass.

Is a Nano hard to wrap?

A Nano is not hard to wrap because of its small size and simple panels, but some parts add work. The tailgate has the rear glass set into it, so the film must be trimmed exactly at the edge of the glass. The four door handles and badges require careful cut-outs. With 124.6 in (3,164 mm) of length, the car fits easily in a wrap bay and costs less labor time.

How many generations of the Nano does this page cover?

This page covers one generation of the Nano, the first generation produced from 2008 to 2015. It includes the only body style offered: a four-door hatchback. The film estimates given here apply to that single generation.