Wraps by car

Voyah Dreamer wrap

The Voyah Dreamer wrap page covers the first-generation van, produced from 2022 to the present. This generation is the only one in the catalog, and a full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap. Use that estimate for planning a complete color change on this minivan.

1generations20 mof film for a full wrap

Voyah Dreamer, first generation, factory photo
Voyah Dreamer, first generation. Factory color shown.

Voyah Dreamer wrap colors and ideas

  • Dreamer black wrap
  • Dreamer white wrap
  • Dreamer gray wrap
  • Dreamer silver wrap
  • Dreamer red wrap
  • Dreamer blue wrap
  • Dreamer green wrap
  • Dreamer yellow wrap
  • Dreamer orange wrap
  • Dreamer purple wrap
  • Dreamer pink wrap
  • Dreamer teal wrap
  • Dreamer brown wrap
  • Dreamer gold wrap
  • Dreamer chrome wrap
  • Dreamer color shift wrap
  • Dreamer carbon fiber wrap
  • Dreamer camo and patterned wrap

How much vinyl to wrap a Voyah Dreamer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowvan (5 doors)209.3 in (5,315 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Dreamer wrap cost factors

Dreamer wrap cost depends on the amount of film, the number of cut-outs, and the height of this van. A full wrap uses about 66 ft (20 m) of cast film, and the tall body (71.7 in (1,820 mm)) means installers need ladders or platforms, which adds labor. The sliding door tracks, cameras, and charge port door require precise trimming, so the price is higher than for a simple sedan. Chrome delete (bright trim covered with black film) is a smaller job, but the window trim and badges still need time to wrap neatly.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.
  • Restyled in 2024, 2025: bumpers and lights differ between the versions, and so do the film cuts.

Dreamer wraps by generation

Swipe sideways. Tap a card for the full description.

Voyah Dreamer, first generation, factory photo
Factory color shown

2022–now Dreamer van (first generation)

2022–nowvan (5 doors)209.3 in (5,315 mm)

The first generation of the Voyah Dreamer has sliding side doors, and the tracks stay bare while the film is cut along them. The doors move on external rails, so any wrap there must end cleanly at the track edge to avoid peeling. Installers use knifeless tape for this cut to protect the paint underneath. This detail is the first thing to check on a wrapped Dreamer because it affects the whole side design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Dreamer

A partial wrap on a Dreamer can cover the hood, mirror caps, and trunk lid to change the look without wrapping the whole van. Dreamer chrome delete means covering the window trim and badges with black film for a cleaner appearance. Paint protection film (PPF) is clear film on the front end to guard against rock chips on the bumper, hood, and fenders. These smaller jobs use less material than a full wrap and are a good way to test a color before committing.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Voyah Dreamer: body, cut-outs and film

A Voyah Dreamer vinyl wrap has to cover a long, tall van body measuring 209.3 in (5,315 mm) in length and 71.7 in (1,820 mm) in height, so installers work from a platform for the roof. The five-door body includes sliding side doors, which require careful cutting around the door tracks so the film does not bind. The paint protection film (PPF) option is often applied to the front end first because that area takes the most stone chips.

Dreamer wrap ideas start with the sliding side doors, where the tracks stay bare and the film is cut along them for smooth operation. Every trim has a panoramic glass roof, so the film ends at the roof rails and no vinyl goes on the glass. The body has cameras in several places, and the film is cut around each lens to keep the view clear. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own so it can open without pulling the main panel.

To figure how much vinyl to wrap a Dreamer, compare the sizes and features that changed with the 2024 and 2025 restyling. The overall length and roof height stayed the same, so the main film estimate of 66 ft (20 m) holds for all years in this generation. If the wrap uses chrome or patterned film, add about 20 percent for matching seams and direction, bringing the total to about 77 ft (23.5 m). The sliding door tracks and glass roof are the same across years, so there is no need to recut those areas.

Questions about wrapping a Voyah Dreamer

How much vinyl does it take to wrap a Voyah Dreamer?

A full wrap of a Voyah Dreamer takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl film. This estimate is for the first-generation body from 2022 to the present, with no roof wrap on the glass. If you choose chrome or patterned film, plan for about 77 ft (23.5 m) because of additional seams and pattern matching.

Are the sliding doors of a Dreamer wrapped?

The sliding doors of a Dreamer are wrapped on the door panels, but the tracks stay bare. The film is cut along the track edge so the door can slide without scraping the vinyl. The small area inside the track is left unpainted and unwrapped by design.

Can the roof of a Dreamer be wrapped?

The roof of a Dreamer can be wrapped, but only the metal roof rails and the area around them, not the panoramic glass. The glass roof is not covered with vinyl because it would block the view and could trap heat. A roof wrap on this van requires working from a platform since it stands 71.7 in (1,820 mm) tall.

Which years of the Dreamer take the same film cuts?

All years of the Dreamer from 2022 to now take the same film cuts for the main body. The restyling in 2024 and 2025 did not change the door shapes, window openings, roof, or track positions. One set of templates works for every trim in this first generation.