Wraps by car

W Motors Fenyr Supersport wrap

This page covers the W Motors Fenyr Supersport wrap, a vinyl wrap project for a rare two-door sports car with a very low production number. The catalog lists one generation of the Fenyr Supersport, produced from 2015 to now, all sharing the same coupe body. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 57 ft (17.5 m).

1generations15 mof film for a full wrap

W Motors Fenyr Supersport, first generation, factory photo
W Motors Fenyr Supersport, first generation. Factory color shown.

W Motors Fenyr Supersport wrap colors and ideas

  • Fenyr Supersport black wrap
  • Fenyr Supersport white wrap
  • Fenyr Supersport gray wrap
  • Fenyr Supersport silver wrap
  • Fenyr Supersport red wrap
  • Fenyr Supersport blue wrap
  • Fenyr Supersport green wrap
  • Fenyr Supersport yellow wrap
  • Fenyr Supersport orange wrap
  • Fenyr Supersport purple wrap
  • Fenyr Supersport pink wrap
  • Fenyr Supersport teal wrap
  • Fenyr Supersport brown wrap
  • Fenyr Supersport gold wrap
  • Fenyr Supersport chrome wrap
  • Fenyr Supersport color shift wrap
  • Fenyr Supersport carbon fiber wrap
  • Fenyr Supersport camo and patterned wrap

How much vinyl to wrap a W Motors Fenyr Supersport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowcoupe (2 doors)177.0 in (4,495 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Fenyr Supersport wrap cost factors

The Fenyr Supersport wrap cost depends mainly on the film type, the number of panels, and the labor for a car of this size and shape. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises the material amount to about 57 ft (17.5 m). Installers also charge for the extra time needed to wrap the two long side doors as single pieces and to manage the complex curves of the bumpers and air intakes.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Fenyr Supersport wraps by generation

Swipe sideways. Tap a card for the full description.

W Motors Fenyr Supersport, first generation, factory photo
Factory color shown

2015–now Fenyr Supersport coupe (first generation)

2015–nowcoupe (2 doors)177.0 in (4,495 mm)

The first generation W Motors Fenyr Supersport, built from 2015 to now, is a coupe with a length of 177.0 in (4,495 mm) and only two doors, which means the film is applied to fewer but larger panels than on a four-door car. The absence of rear doors reduces the number of cut lines, but each side door skin demands one large sheet of film that must be laid without wrinkles. The wide rear fenders and deep front splitter add surface area and require skilled stretching, so the total film needed is about 49 ft (15 m) for cast film or 57 ft (17.5 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Fenyr Supersport

A partial wrap on a Fenyr Supersport can cover the roof, hood, or mirror caps while leaving the rest of the factory paint exposed. Another option is chrome delete, which applies black film to the window trim and badges for a darker look. Paint protection film (PPF) is also available as a clear film on the front end to guard against stone chips without changing the car's color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a W Motors Fenyr Supersport: body, cut-outs and film

A W Motors Fenyr Supersport vinyl wrap must cover a body that is 177.0 in (4,495 mm) long with only two long side doors, so each side is a large continuous panel. The coupe shape has a low roof and large rear haunches, which means the film needs careful stretching around the rear fenders. Since the car has no rear doors, the installer manages fewer seams but longer pieces on each flank that require precise alignment.

Fenyr Supersport wrap ideas often start with the fact that each long side door is one large piece of film, so choose a color or finish that looks good on a big flat area. The door handles, mirrors, and badges need cut-outs, and the mirrors may be removed for a cleaner edge. The front bumper, rear diffuser, and side air intakes have complex curves that demand relief cuts and inlays for a durable wrap.

If you need to know how much vinyl to wrap a Fenyr Supersport, the answer is the same for every production year because the catalog shows only one generation. The coupe body has not changed in length or panel count since 2015, so the film estimate of about 49 ft (15 m) applies to all cars from 2015 to now. Chrome or patterned film requires about 57 ft (17.5 m) because the installer must allow extra material to match patterns at the seams.

Questions about wrapping a W Motors Fenyr Supersport

How much vinyl does it take to wrap a W Motors Fenyr Supersport?

A W Motors Fenyr Supersport needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap, or about 57 ft (17.5 m) if you choose chrome or patterned film. The extra length for patterned film allows the installer to align the pattern at the seams and around the complex curves of the coupe body. These figures cover the entire exterior of the single coupe body produced from 2015 to now.

Can I wrap only the hood or the roof of a Fenyr Supersport?

Yes, you can wrap only the hood or the roof of a Fenyr Supersport as a partial job, and many owners do this to change the look without a full wrap. The partial wrap options listed on this page include the roof, the hood, and the mirror caps, each done as a separate section. Chrome delete of the window trim and badges, and clear paint protection film on the front end, are also available partial jobs.

Is a Fenyr Supersport hard to wrap?

A Fenyr Supersport is challenging to wrap because each of its two long side doors is one large piece of film that must be applied without wrinkles over a long flat area. The coupe body has large rear haunches and deep air intakes that require the installer to make relief cuts and use inlays for a smooth finish. The car's wide body and 177.0 in (4,495 mm) length also mean there is more surface area to cover and more material to handle at once.

How many generations of the Fenyr Supersport does this page cover?

This page covers one generation of the W Motors Fenyr Supersport, the first generation produced from 2015 to now. Only one generation appears in the catalog, and all cars from that period share the same coupe body, so the wrap film estimate is the same for every year.