Wraps by car

Wanderer W23 wrap

A Wanderer W23 wrap covers the full body of this 1936–1941 luxury convertible with vinyl wrap film. The model has one generation, and a complete wrap of its 181.1 in (4,600 mm) body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 64 ft (19.5 m) for the same car.

1generations16.5 mof film for a full wrap

Wanderer W23, first generation, factory photo
Wanderer W23, first generation. Factory color shown.

Wanderer W23 wrap colors and ideas

  • Wanderer W23 black wrap
  • Wanderer W23 white wrap
  • Wanderer W23 gray wrap
  • Wanderer W23 silver wrap
  • Wanderer W23 red wrap
  • Wanderer W23 blue wrap
  • Wanderer W23 green wrap
  • Wanderer W23 yellow wrap
  • Wanderer W23 orange wrap
  • Wanderer W23 purple wrap
  • Wanderer W23 pink wrap
  • Wanderer W23 teal wrap
  • Wanderer W23 brown wrap
  • Wanderer W23 gold wrap
  • Wanderer W23 chrome wrap
  • Wanderer W23 color shift wrap
  • Wanderer W23 carbon fiber wrap
  • Wanderer W23 camo and patterned wrap

How much vinyl to wrap a Wanderer W23

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1936–1941convertible (2 doors)181.1 in (4,600 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Wanderer W23 wrap cost factors

Wanderer W23 wrap cost is driven by the size of the car, the film type and the amount of trim work. The 181.1 in (4,600 mm) body already needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. Choosing chrome or patterned film brings the estimate to about 64 ft (19.5 m), and the single convertible body has a top that is left unwrapped, which changes the total area.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Wanderer W23 wraps by generation

Swipe sideways. Tap a card for the full description.

Wanderer W23, first generation, factory photo
Factory color shown

1936–1941 Wanderer W23 convertible (first generation)

1936–1941convertible (2 doors)181.1 in (4,600 mm)

The open top of the Wanderer W23 is not covered with vinyl during a wrap. On this 1936–1941 convertible the fabric top is left unwrapped, and the film ends where the fabric begins. If the car were fitted with a folding hard top, that top would be wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Wanderer W23

A partial wrap on the Wanderer W23 can cover the hood, mirror caps or rear deck without wrapping the whole 181.1 in (4,600 mm) body. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear shield.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Wanderer W23: body, cut-outs and film

The Wanderer W23 vinyl wrap is shaped by the car's single convertible body style and its 181.1 in (4,600 mm) length. Two doors mean fewer panel seams than a four-door, but the long rear deck and rounded fenders add sheet area. A full wrap of this body uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) with chrome or patterned film.

Wanderer W23 wrap ideas start with the trim and openings that need careful cutting on this car. Door handles, the front grille, headlight rings and the W23 badge are cut out or removed before film goes over the panel. The convertible top is not wrapped, so the film ends cleanly where the fabric begins.

How much vinyl to wrap a Wanderer W23 depends on the single generation offered from 1936 to 1941. The body length stays at 181.1 in (4,600 mm) across those years, so the film estimate of about 54 ft (16.5 m) of 60-inch (1.52 m) cast film holds for every car. Chrome or patterned film raises the figure to about 64 ft (19.5 m) because more material is used for wrapped brightwork.

More Wanderer wraps

Questions about wrapping a Wanderer W23

How much vinyl does it take to wrap a Wanderer W23?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Wanderer W23 fully. The estimate is based on the 1936–1941 convertible body at 181.1 in (4,600 mm). If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

Is the top of a Wanderer W23 wrapped?

No, the top of a Wanderer W23 is not wrapped because it is fabric. On this convertible the film ends where the fabric begins. A folding hard top would be wrapped as separate panels, but the standard soft top stays uncovered.

Can I wrap only the hood or the roof of a Wanderer W23?

Yes, you can wrap only the hood or the rear deck of a Wanderer W23 as a partial job. The partial wrap options for this car include the hood, mirror caps and rear deck. A chrome delete on the window trim and badges is another smaller job.

Is a Wanderer W23 hard to wrap?

Yes, a Wanderer W23 adds extra work compared to a modern sedan because of its 1936–1941 convertible body and 181.1 in (4,600 mm) length. The fabric top must be masked off where it meets the body, and the rounded fenders plus long rear deck need careful stretching. Door handles, the grille and badges also need cut-outs or removal.