Wraps by car

Wartburg 13 wrap

The Wartburg 13 wrap page covers the sole generation produced from 1988 to 1991. It includes the compact sedan and wagon bodies and the vinyl wrap needed for a full color change. A complete wrap of the newest body takes about 52 ft (16 m) for the sedan and up to 59 ft (18 m) for the wagon, using 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Wartburg 13, first generation, factory photo
Wartburg 13, first generation. Factory color shown.

Wartburg 13 wrap colors and ideas

  • Wartburg 13 black wrap
  • Wartburg 13 white wrap
  • Wartburg 13 gray wrap
  • Wartburg 13 silver wrap
  • Wartburg 13 red wrap
  • Wartburg 13 blue wrap
  • Wartburg 13 green wrap
  • Wartburg 13 yellow wrap
  • Wartburg 13 orange wrap
  • Wartburg 13 purple wrap
  • Wartburg 13 pink wrap
  • Wartburg 13 teal wrap
  • Wartburg 13 brown wrap
  • Wartburg 13 gold wrap
  • Wartburg 13 chrome wrap
  • Wartburg 13 color shift wrap
  • Wartburg 13 carbon fiber wrap
  • Wartburg 13 camo and patterned wrap

How much vinyl to wrap a Wartburg 13

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1991sedan, wagon (4 or 5 doors)166.0 in (4,216 mm) to 168.3 in (4,276 mm)about 52 ft (16 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Wartburg 13 wrap cost factors

Wartburg 13 wrap cost depends on the body style, the film type, and the amount of disassembly. The wagon uses more film than the sedan, about 59 ft (18 m) against 52 ft (16 m) of 60-inch (1.52 m) material. A chrome or patterned film raises the film amount to about 66 ft (20 m). Removing door handles, mirrors, and badges adds labour time, and a full wrap of the tailgate needs careful trimming around the glass.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Wartburg 13 wraps by generation

Swipe sideways. Tap a card for the full description.

Wartburg 13, first generation, factory photo
Factory color shown

1988–1991 Wartburg 13 sedan, wagon (first generation)

1988–1991sedan, wagon (4 or 5 doors)166.0 in (4,216 mm) to 168.3 in (4,276 mm)

The first generation Wartburg 13 offers a sedan and a wagon, and the style decides the panel plan and the film amount. The sedan has four doors and a trunk lid, while the wagon adds a fifth door and a taller roof. Both bodies share the same front end, so the bumper, hood, and fenders wrap the same way. The wagon needs extra film for the rear pillars and the tailgate, which carries the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Wartburg 13

A partial wrap on a Wartburg 13 can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is a clear film on the front end. These jobs use far less film than a full wrap and suit a single panel or a small accent. The roof on a wagon is longer, so a roof wrap needs a little more film than on the sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Wartburg 13: body, cut-outs and film

A Wartburg 13 vinyl wrap must follow the simple, boxy panel shapes of this compact car. The sedan measures 166.0 in (4,216 mm) and the wagon reaches 168.3 in (4,276 mm), so the wagon adds a little film on the roof and rear pillars. Four- and five-door bodies share the same front structure, which keeps the front panel plan identical. The straight beltline and flat sides make long, clean pieces possible without excessive stretching.

Wartburg 13 wrap ideas start with the tailgate because the rear glass is set into it. The film ends at the edge of the glass, so you leave a clean cut line around the window and wrap the painted frame. Door handles, mirrors, and trim come off for a neater edge, and the badges are removed before wrapping. The roof gutters can stay in place if you trim the film tightly along them.

How much vinyl to wrap a Wartburg 13 depends on the body style you choose. The sedan needs about 52 ft (16 m) and the wagon about 59 ft (18 m) of 60-inch (1.52 m) cast film. If you pick a chrome or patterned film, plan for up to about 66 ft (20 m) because pattern matching and extra coverage add waste. Every generation in the catalog is the same first generation, so these figures do not change between years.

More Wartburg wraps

Questions about wrapping a Wartburg 13

How much vinyl does it take to wrap a Wartburg 13?

A Wartburg 13 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the sedan and about 59 ft (18 m) for the wagon. These figures come from the newest body in the catalog, which is the only generation. A chrome or patterned film can require up to about 66 ft (20 m) because of extra waste.

Which Wartburg 13 body takes more film?

The Wartburg 13 wagon takes more film than the sedan. The wagon needs about 59 ft (18 m) of 60-inch (1.52 m) film, while the sedan needs about 52 ft (16 m). The difference comes from the wagon's taller roof and the tailgate with the rear glass.

Can I wrap only the hood or the roof of a Wartburg 13?

Yes, you can wrap only the hood or the roof of a Wartburg 13. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is a clear film for the front end. The wagon roof is longer and needs a little more film than the sedan roof.

Is a Wartburg 13 hard to wrap?

A Wartburg 13 is not especially hard to wrap, but the tailgate adds work. The rear glass is set into the tailgate, so the film must end at the edge of the glass and be trimmed carefully. The boxy shape and flat panels make the rest of the car straightforward. The wagon body is slightly longer at 168.3 in (4,276 mm), which adds a little cutting time.