Wraps by car

Willys MB wrap

The Willys MB wrap page covers this open-top SUV from 1941–1945, which has one generation in this catalog. A full vinyl wrap of the newest body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the figure to about 44 ft (13.5 m).

1generations12 mof film for a full wrap

Willys MB, first generation, factory photo
Willys MB, first generation. Factory color shown.

Willys MB wrap colors and ideas

  • Willys MB black wrap
  • Willys MB white wrap
  • Willys MB gray wrap
  • Willys MB silver wrap
  • Willys MB red wrap
  • Willys MB blue wrap
  • Willys MB green wrap
  • Willys MB yellow wrap
  • Willys MB orange wrap
  • Willys MB purple wrap
  • Willys MB pink wrap
  • Willys MB teal wrap
  • Willys MB brown wrap
  • Willys MB gold wrap
  • Willys MB chrome wrap
  • Willys MB color shift wrap
  • Willys MB carbon fiber wrap
  • Willys MB camo and patterned wrap

How much vinyl to wrap a Willys MB

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1941–1945open-top SUV (2 doors)131.3 in (3,335 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Willys MB wrap cost factors

A Willys MB wrap cost depends on the amount of film and the labor for a short, tall open-top body. The full body needs about 39 ft (12 m) of 60-inch cast film, and the 72.0 in height adds platform work for the roof. Cut-outs around the tailgate glass and the edge of a folding hard top also affect the quote.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: open-top SUV (2 doors).
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Willys MB wraps by generation

Swipe sideways. Tap a card for the full description.

Willys MB, first generation, factory photo
Factory color shown

1941–1945 Willys MB open-top SUV (first generation)

1941–1945open-top SUV (2 doors)131.3 in (3,335 mm)

On the first generation Willys MB, the open top is not wrapped when it is a fabric top. The film ends exactly where the fabric top begins, so the wrap stops at the body's upper edge. A folding hard top on this generation is wrapped as its own separate panels.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a Willys MB

A partial wrap on the Willys MB can cover the hood, mirror caps, or tailgate. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end only.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Willys MB: body, cut-outs and film

A Willys MB vinyl wrap must follow the compact 131.3 in (3,335 mm) body and its open-top two-door shape. The fabric top is not wrapped, and the film ends where that top begins. Because the body is tall at 72.0 in (1,830 mm), the roof is wrapped from a platform rather than from the ground.

Willys MB wrap ideas start with the open-top body, where a fabric top is left uncovered and the film ends at its edge. The tailgate with rear glass needs the film trimmed to end at the edge of the glass. For a folding hard top, the panels are wrapped as separate pieces of their own.

How much vinyl to wrap a Willys MB depends on the single generation from 1941–1945 and its one body style. The open-top SUV needs about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, plan for about 44 ft (13.5 m).

Questions about wrapping a Willys MB

How much vinyl does it take to wrap a Willys MB?

A full wrap of a Willys MB takes about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, the estimate rises to about 44 ft (13.5 m). These figures cover the postwar open-top SUV body from 1941–1945.

Is the top of a Willys MB wrapped?

No, the fabric top of a Willys MB is not wrapped. The vinyl ends at the edge where the fabric top begins. A folding hard top is different: its panels are wrapped as separate pieces.

Can I wrap only the hood or the roof of a Willys MB?

Yes, you can wrap only the hood, mirror caps, or tailgate of a Willys MB. These are the partial wrap jobs available for this car. A front-end paint protection film is also an option.

Is a Willys MB hard to wrap?

A Willys MB adds work because the 72.0 in (1,830 mm) tall body means the roof is wrapped from a platform. The tailgate glass and the edge of a folding hard top need careful trimming. The open-top design also means the film must stop cleanly where a fabric top begins.