Wraps by car

Zastava Florida wrap

This page covers the Zastava Florida, a compact hatchback made in one generation from 1990 to 2008. A full vinyl wrap of the body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Zastava Florida, first generation, factory photo
Zastava Florida, first generation. Factory color shown.

Zastava Florida wrap colors and ideas

  • Florida black wrap
  • Florida white wrap
  • Florida gray wrap
  • Florida silver wrap
  • Florida red wrap
  • Florida blue wrap
  • Florida green wrap
  • Florida yellow wrap
  • Florida orange wrap
  • Florida purple wrap
  • Florida pink wrap
  • Florida teal wrap
  • Florida brown wrap
  • Florida gold wrap
  • Florida chrome wrap
  • Florida color shift wrap
  • Florida carbon fiber wrap
  • Florida camo and patterned wrap

How much vinyl to wrap a Zastava Florida

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–2008hatchback (5 doors)158.7 in (4,030 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Florida wrap cost factors

Florida wrap cost depends on the film type, the car's condition, and the labor for its 158.7 in (4,030 mm) body. A full wrap uses about 46 ft (14 m) of standard film, but chrome or patterned film raises the amount to about 57 ft (17.5 m). Paint defects on a car from 1990–2008 can add preparation time.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Florida wraps by generation

Swipe sideways. Tap a card for the full description.

Zastava Florida, first generation, factory photo
Factory color shown

1990–2008 Florida hatchback (first generation)

1990–2008hatchback (5 doors)158.7 in (4,030 mm)

The first generation Florida (1990–2008) may have original or repainted panels after decades on the road. A test spot on the paint before a full wrap shows whether the film will stick safely. Any rust or failing clear coat should be fixed or the wrap will not lay flat.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Florida

A partial wrap on a Florida covers the roof, hood, or mirror caps without wrapping the whole hatchback. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Zastava Florida: body, cut-outs and film

The Zastava Florida vinyl wrap fits a five-door hatchback that is 158.7 in (4,030 mm) long. This compact body has a tailgate with the rear glass in it, so the vinyl ends at the edge of the glass. The straightforward shape means most panels are wrapped as single pieces.

Florida wrap ideas start with the tailgate, where the rear glass sits inside the panel. The film is cut to end at the edge of the glass, which keeps the installation clean. A chrome delete covers the window trim and badges with black film for a different look.

To know how much vinyl to wrap a Florida, use the single body style from 1990–2008. A full wrap takes about 46 ft (14 m) of standard 60-inch (1.52 m) film, while chrome or patterned film needs about 57 ft (17.5 m). Extra film is wise if the car has deep scratches or rust repair.

Questions about wrapping a Zastava Florida

How much vinyl does it take to wrap a Zastava Florida?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a Zastava Florida. If you choose chrome or patterned film, plan for about 57 ft (17.5 m) because the pattern needs matching.

Can I wrap only the hood or the roof of a Florida?

Yes, you can wrap only the hood or the roof of a Florida. A partial wrap can also cover the mirror caps. These smaller jobs use less film than a full wrap.

Is a Florida hard to wrap?

A Florida is not the hardest car to wrap, but the tailgate adds work because the rear glass is inside the panel. The installer must cut the film to end at the edge of the glass. The car's 158.7 in (4,030 mm) length is typical for a compact hatchback.

How many generations of the Florida does this page cover?

This page covers one generation of the Florida, produced from 1990 to 2008. All years share the five-door hatchback body.