Choosing a Zeekr 9X wrapped in teal starts with the finish, then the film line, and finally whether you want a full or partial color change. Matte wraps soften reflections and give the body a smooth, solid appearance. Satin sits between matte and gloss with a low sheen that still shows the body lines. Gloss films reflect the most light and look closest to a deep painted finish.
The factory paint should be clean and free of large chips before teal film is applied, because wrap film follows the surface it is laid on. Deep scratches and rust spots need repair so they do not show through the vinyl. Where the film ends, such as at the tailgate glass, the installer cuts a clean seam that follows the panel edge. On the 9X the charge port door is wrapped as a separate small piece, so its seam stays hidden when the door is closed.
A teal wrap on the Zeekr 9X is removable, but removal should be done by a wrap shop with heat and the right technique. Hand wash the wrapped car with a soft mitt and mild automotive soap. Avoid automated car washes with brushes and keep the film away from pressure washers held too close. Proper care keeps the teal finish looking even across all panels.


