Wraps by car

Zenos E10 wrap

The Zenos E10 wrap guide covers the first generation built from 2014 to 2016. A full vinyl wrap of the convertible body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 5 ft (1.5 m) for a total near 43 ft (13 m).

1generations11.5 mof film for a full wrap

Zenos E10, first generation, factory photo
Zenos E10, first generation. Factory color shown.

Zenos E10 wrap colors and ideas

  • Zenos E10 black wrap
  • Zenos E10 white wrap
  • Zenos E10 gray wrap
  • Zenos E10 silver wrap
  • Zenos E10 red wrap
  • Zenos E10 blue wrap
  • Zenos E10 green wrap
  • Zenos E10 yellow wrap
  • Zenos E10 orange wrap
  • Zenos E10 purple wrap
  • Zenos E10 pink wrap
  • Zenos E10 teal wrap
  • Zenos E10 brown wrap
  • Zenos E10 gold wrap
  • Zenos E10 chrome wrap
  • Zenos E10 color shift wrap
  • Zenos E10 carbon fiber wrap
  • Zenos E10 camo and patterned wrap

How much vinyl to wrap a Zenos E10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2016convertible149.6 in (3,800 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

Zenos E10 wrap cost factors

Zenos E10 wrap cost depends on the amount and type of film, plus the labor on a 149.6 in (3,800 mm) convertible. A full wrap uses about 38 ft (11.5 m) of cast film, while chrome or patterned film raises the total to near 43 ft (13 m). Installers also charge for removing mirror caps, the rear diffuser and badges before wrapping.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).
  • Body: convertible.
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Zenos E10 wraps by generation

Swipe sideways. Tap a card for the full description.

Zenos E10, first generation, factory photo
Factory color shown

2014–2016 Zenos E10 convertible (first generation)

2014–2016convertible149.6 in (3,800 mm)

The first generation Zenos E10 has a fabric convertible top that is not wrapped. The vinyl film ends where the top begins, so the wrap stops at the edge of the windshield frame and the rear deck. No film goes over the fabric itself, but the rear deck behind the seats is wrapped as a separate panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a Zenos E10

Partial wrap choices for the Zenos E10 include the hood, mirror caps and rear deck in one color. A chrome delete on the window trim and badges uses black film for a clean look. Paint protection film (PPF) is a clear film applied to the front end to guard the clamshell and nose.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Zenos E10: body, cut-outs and film

A Zenos E10 vinyl wrap works with one compact convertible body style. The car is 149.6 in (3,800 mm) long, so most of the film goes to the open rear deck and the front clamshell. Installers cut fewer large panels than on a sedan because the body is small and the top section is separate.

Zenos E10 wrap ideas start with the front clamshell, which lifts away for access but stays on for wrapping. Door mirror caps and the rear diffuser come off to wrap edges cleanly. Window trim and badges need cut-outs or removal before a chrome delete.

To work out how much vinyl to wrap a Zenos E10, count only one body for all three production years. The 2014 to 2016 convertible shares the same 149.6 in (3,800 mm) shell, so the estimate of about 38 ft (11.5 m) does not change. A patterned film still needs about 43 ft (13 m) because the extra is used for matching.

Questions about wrapping a Zenos E10

How much vinyl does it take to wrap a Zenos E10?

Yes, a Zenos E10 needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. If you choose chrome or patterned film, plan for about 43 ft (13 m) to allow for pattern matching.

Is the top of a Zenos E10 wrapped?

No, the fabric top of a Zenos E10 is not wrapped. The vinyl film ends where the top begins, so installers wrap only the body panels around it.

Can I wrap only the hood or the roof of a Zenos E10?

Yes, you can wrap only the hood or the rear deck of a Zenos E10 as a partial job. Installers also offer mirror caps, window trim and badges as smaller wrap items.

Is a Zenos E10 hard to wrap?

Yes, a Zenos E10 gives a wrap installer extra work around the convertible top. The fabric roof is not wrapped and the film must end cleanly at its edge, which needs careful trimming. Its compact 149.6 in (3,800 mm) body also hides tight curves behind the seats that take more time.