Wraps by car

Aito M5 wrap

The Aito M5 wrap page covers this SUV from its first generation, which began in 2021 and continues today. A full vinyl wrap of the newest body uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 72 ft (22 m).

1generations19.5 mof film for a full wrap

Aito M5, first generation, factory photo
Aito M5, first generation. Factory color shown.

Aito M5 wrap colors and ideas

  • Aito M5 black wrap
  • Aito M5 white wrap
  • Aito M5 gray wrap
  • Aito M5 silver wrap
  • Aito M5 red wrap
  • Aito M5 blue wrap
  • Aito M5 green wrap
  • Aito M5 yellow wrap
  • Aito M5 orange wrap
  • Aito M5 purple wrap
  • Aito M5 pink wrap
  • Aito M5 teal wrap
  • Aito M5 brown wrap
  • Aito M5 gold wrap
  • Aito M5 chrome wrap
  • Aito M5 color shift wrap
  • Aito M5 carbon fiber wrap
  • Aito M5 camo and patterned wrap

How much vinyl to wrap an Aito M5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)187.8 in (4,770 mm) to 188.4 in (4,785 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Aito M5 wrap cost factors

The Aito M5 wrap cost is shaped by three numbers from this car: the body length of 187.8 to 188.4 in (4,770 to 4,785 mm), the film need of about 64 ft (19.5 m), and the extra work of the rear glass tailgate and charge port door. A chrome delete or partial wrap uses less film and less labor. A full color change with patterned film raises the film amount to about 72 ft (22 m).

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Aito M5 wraps by generation

Swipe sideways. Tap a card for the full description.

Aito M5, first generation, factory photo
Factory color shown

2021–now Aito M5 SUV (first generation)

2021–nowSUV (5 doors)187.8 in (4,770 mm) to 188.4 in (4,785 mm)

The first generation Aito M5 from 2021–now is the only body style in the catalog, a five-door SUV. The restyling in 2024 changed the bumpers and lights, so film cut for one version does not fit the other. When you order a pre-cut kit, match it to the production date of the car, not just the model name.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Aito M5

The Aito M5 chrome delete covers the window trim and badges with black film on an SUV that has plenty of brightwork at the beltline. A partial wrap on the Aito M5 often means the roof, hood, or mirror caps, and each of these uses a small fraction of the full wrap film. Paint protection film (PPF) as a clear film on the front end is another option for this car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aito M5: body, cut-outs and film

The Aito M5 vinyl wrap job starts with a five-door SUV body that is 187.8 in (4,770 mm) long before the 2024 restyling and 188.4 in (4,785 mm) after it. The extra length of the newer version is small, so film estimates stay very close. The tall, flat sides and large tailgate mean the bulk of the film goes on big, simple panels.

Aito M5 wrap ideas work best when you account for the tailgate with the rear glass in it, because the film ends at the edge of the glass. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own. These cut-outs are easy to handle once the installer pre-cuts the film on a plotter.

How much vinyl to wrap an Aito M5 depends on the generation, and for this car there is only one generation from 2021–now. The 2024 restyling changed the bumpers and lights, which can slightly change the amount of film on those parts. The overall full wrap estimate remains about 64 ft (19.5 m) of cast film.

Questions about wrapping an Aito M5

How much vinyl does it take to wrap an Aito M5?

A full wrap of an Aito M5 takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If the design uses chrome or patterned film, the amount rises to about 72 ft (22 m). This figure covers the newest body of the first generation, which is 188.4 in (4,785 mm) long.

Which years of the Aito M5 take the same film cuts?

The Aito M5 has one generation from 2021–now, but the 2024 restyling changed the bumpers and lights. Film cut for the 2021–2023 version will not fit the 2024–now version on those parts. For the rest of the body, the cuts are the same across the generation.

Can I wrap only the hood or the roof of an Aito M5?

Yes, you can wrap only the hood or the roof of an Aito M5. A partial wrap on this SUV typically covers the roof, hood, or mirror caps. This uses far less film than the full wrap estimate of about 64 ft (19.5 m).

Is an Aito M5 hard to wrap?

An Aito M5 is moderately hard to wrap because of the tailgate with the rear glass in it, where the film must end at the edge of the glass. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own. The large, flat panels help, but the overall size of 188.4 in (4,785 mm) adds work.