Wraps by car

Aito M7 wrap

The Aito M7 wrap page covers both generations of this SUV and the vinyl wrap film a full wrap of the newest body takes.

2generations

Aito M7, second generation, factory photo
Aito M7, second generation. Factory color shown.

Aito M7 wrap colors and ideas

  • Aito M7 black wrap
  • Aito M7 white wrap
  • Aito M7 gray wrap
  • Aito M7 silver wrap
  • Aito M7 red wrap
  • Aito M7 blue wrap
  • Aito M7 green wrap
  • Aito M7 yellow wrap
  • Aito M7 orange wrap
  • Aito M7 purple wrap
  • Aito M7 pink wrap
  • Aito M7 teal wrap
  • Aito M7 brown wrap
  • Aito M7 gold wrap
  • Aito M7 chrome wrap
  • Aito M7 color shift wrap
  • Aito M7 carbon fiber wrap
  • Aito M7 camo and patterned wrap

How much vinyl to wrap an Aito M7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)——
2024–nowSUV (5 doors)——

Aito M7 wrap cost factors

The Aito M7 wrap cost depends on how many panels you cover, the film you pick and the amount of disassembly the job needs. A full wrap of this five-door SUV uses more film than a partial job on the hood, roof and mirror caps. The tailgate glass and the roof rails add cutting and removal time, which changes the labor part of the cost. A color change wrap costs differently from a clear paint protection film, because the two films are not priced or installed the same way.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Aito M7 wraps by generation

Swipe sideways. Tap a card for the full description.

Aito M7, second generation, factory photo
Factory color shown

2025–now Aito M7 SUV (second generation)

2025–nowSUV (5 doors)

The second generation Aito M7 is a five-door SUV whose long roof, tall doors and wide tailgate make it one of the more film-hungry bodies in its class. A full wrap of this body uses close to the full estimated amount of film, because the rear pillars and the tailgate add almost a full extra panel compared with a sedan. The wrap is split into around 12 main panels, not counting the mirrors, door handles and small trim pieces. The tailgate glass is set into the tailgate, so the film ends at the edge of the glass and does not wrap into the opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Aito M7, first generation, factory photo
Factory color shown

2024–now Aito M7 SUV (first generation)

2024–nowSUV (5 doors)

The first generation Aito M7 was sold from 2024 and overlaps with the second generation from 2025 on, so owners of cars from 2025 need to check which body they have. The easiest check is the front bumper: the first generation has a different grille and lower intake shape than the second generation. The doors, roof and tailgate are the same, but the front and rear fascias take different film patterns. This page covers both bodies, so the wrap facts and the film estimate apply to the first generation as well.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Roof, hood, chrome delete and PPF on an Aito M7

A partial wrap on an Aito M7 covers the roof, the hood and the mirror caps as one film package. An Aito M7 chrome delete covers the window trim and the badges with black film. Paint protection film, or PPF, is a clear film that goes on the front end of this car. Each of these jobs uses less film than a full wrap and can be done without removing the tailgate glass or the roof rails.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aito M7: body, cut-outs and film

The Aito M7 vinyl wrap starts from a five-door SUV body with large, flat panels that reward careful film cutting. The tailgate glass is set into the tailgate, so the film ends cleanly at the edge of the glass. A full wrap uses close to the complete film estimate for the newest body, with extra film kept for the roof and the rear pillars. The door handles, mirrors and roof rails are wrapped as separate pieces.

Aito M7 wrap ideas begin with the biggest surface on the car: the tailgate, where the rear glass is surrounded by film. The tailgate needs the film trimmed to the glass edge, which is one of the clearest cut lines on the body. The front bumper, side skirts and door sills also take separate inlays so the film does not bridge deep recesses. The roof is often done in one piece, but the antenna and the roof rails come off first.

If you want to know how much vinyl to wrap an Aito M7, the two generations differ mainly in their front and rear fascias. The first generation, sold from 2024, has a different bumper and grille shape than the second generation, which has been sold from 2025. The doors, roof and tailgate are shared, so the main change is in the film patterns for the corners of the car. Anyone counting film should measure the fascias of the exact car before ordering.

Questions about wrapping an Aito M7

How much vinyl does it take to wrap an Aito M7?

It takes about 18 meters (19.7 yards) of vinyl to wrap an Aito M7. That figure is for a full wrap of the newest body, with the roof, tailgate and both fascias included. The tailgate glass is left uncovered, so the film ends at the edge of the glass. The same amount covers the first generation, because the two bodies differ only in the fascias.

Can I wrap only the hood or the roof of an Aito M7?

Yes, you can wrap only the hood or the roof of an Aito M7. A partial wrap on this car covers the roof, the hood and the mirror caps as one package, but a shop can wrap just one of those parts if you ask. The roof is done in one piece, with the antenna and the roof rails removed first. The hood is a single flat panel, so it takes less film than the tailgate.

Is an Aito M7 hard to wrap?

An Aito M7 is not hard to wrap, but the tailgate glass and the roof rails add work. The rear glass is set into the tailgate, so the film must be cut cleanly along the edge of the glass. The roof rails and the antenna have to come off before the roof is wrapped. The five-door body has deep bumper recesses, so the front and rear fascias are done with separate inlays.

How many generations of the Aito M7 does this page cover?

This page covers two generations of the Aito M7. The first generation was sold from 2024 and the second from 2025. The two bodies overlap in 2025, so owners of cars from that year need to check the front bumper to see which one they have. The page gives wrap facts and film estimates for both bodies.