A color change on the S e-tron GT wrapped in gray starts with the finish, because it sets the visual character of the whole car. Matte gray reads as a stealthy, modern finish that hides the body's curves in flat light, while satin adds a slight sheen that picks out the rear haunches and door creases. Gloss gray is closest to a factory paint look and makes the wrap hardest to spot from a distance. Choose the finish first, then pick a specific film within that finish for the exact shade of gray you want.
Factory paint on the S e-tron GT matters when you plan partial coverage, because the gray wrap must match or deliberately contrast with the original color. On a full wrap, the film covers every painted panel, but the jambs, underhood areas, and inner door edges stay in the factory paint unless you pay extra to wrap them. Seams are minimized on the long side doors because each door is a single large piece of film, but some seams remain at the bumper corners and mirror caps. A gray close to the factory color will make those unwrapped edges less obvious.
A gray wrap on the S e-tron GT is removable, which means the factory paint can be revealed later if the film is removed correctly. Hand wash only is the safest method, using a pH-neutral soap and a soft mitt to avoid lifting the film edges. Pressure washers can force water under the film at the door edges and sensor cutouts, so keep the nozzle at a safe distance. No automatic car washes with brushes should be used on a wrapped car.