Wraps by car

Audi S e-tron GT wrap

The Audi S e-tron GT wrap page covers this first-generation full-size sedan from 2024 to now. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 70 ft (21.5 m).

1generations18.5 mof film for a full wrap

Audi S e-tron GT, first generation, factory photo
Audi S e-tron GT, first generation. Factory color shown.

Audi S e-tron GT wrap colors and ideas

  • S e-tron GT black wrap
  • S e-tron GT white wrap
  • S e-tron GT gray wrap
  • S e-tron GT silver wrap
  • S e-tron GT red wrap
  • S e-tron GT blue wrap
  • S e-tron GT green wrap
  • S e-tron GT yellow wrap
  • S e-tron GT orange wrap
  • S e-tron GT purple wrap
  • S e-tron GT pink wrap
  • S e-tron GT teal wrap
  • S e-tron GT brown wrap
  • S e-tron GT gold wrap
  • S e-tron GT chrome wrap
  • S e-tron GT color shift wrap
  • S e-tron GT carbon fiber wrap
  • S e-tron GT camo and patterned wrap

How much vinyl to wrap an Audi S e-tron GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowsedan (2 doors)196.7 in (4,997 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

S e-tron GT wrap cost factors

S e-tron GT wrap cost depends on the film type and the car's size. A full wrap uses about 61 ft (18.5 m) of 60-inch cast film, or about 70 ft (21.5 m) for chrome or patterned film. The tall body and long doors add labor for access and handling.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (85.0 in (2,158 mm)): the roof is wrapped from a platform.

S e-tron GT wraps by generation

Swipe sideways. Tap a card for the full description.

Audi S e-tron GT, first generation, factory photo
Factory color shown

2024–now S e-tron GT sedan (first generation)

2024–nowsedan (2 doors)196.7 in (4,997 mm)

The first-generation Audi S e-tron GT has a panoramic glass roof on every trim. The roof is not wrapped, and the film ends at the roof rails. This keeps the roof dark whatever the color of the film.

Two long side doors: each door is one large piece of film.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (85.0 in (2,158 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an S e-tron GT

An S e-tron GT chrome delete covers window trim and badges with black film. A partial wrap can apply film to the hood, mirror caps, trunk lid, or rear spoiler. Paint protection film (PPF) is a clear option for the front end.

  • Partial wrap: hood, mirror caps, trunk lid, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi S e-tron GT: body, cut-outs and film

The Audi S e-tron GT vinyl wrap is shaped by its sedan body and dimensions. The car measures 196.7 in (4,997 mm) long and 85.0 in (2,158 mm) tall, so the roof is wrapped from a platform. Its two long side doors each accept one large piece of film.

S e-tron GT wrap ideas must account for parts that need cut-outs or removal. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. Cameras in the body also require cut-outs around each lens. The charge port door is wrapped as a small piece of its own.

Learning how much vinyl to wrap an S e-tron GT means checking the generation. The catalog lists one generation produced since 2024. The film estimate for this body is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Audi S e-tron GT

How much vinyl does it take to wrap an Audi S e-tron GT?

A full wrap of an Audi S e-tron GT takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 70 ft (21.5 m).

Can the roof of an S e-tron GT be wrapped?

No, the roof of an S e-tron GT cannot be wrapped because every trim has a panoramic glass roof. The film ends at the roof rails, and the glass is left unwrapped.

Can I wrap only the hood or the roof of an S e-tron GT?

Yes, you can wrap only the hood or the roof of an S e-tron GT. A partial wrap can cover the hood, mirror caps, trunk lid, or rear spoiler.

Is an S e-tron GT hard to wrap?

The S e-tron GT adds work because of its size and features. The tall body at 85.0 in (2,158 mm) requires a platform for roof work. Sensors, cameras, and the charge port door need careful cut-outs.