Wraps by car

Audi SQ8 wrap

The Audi SQ8 wrap guide covers the first generation of this SUV, built from 2019 to the present, plus the film needed for a full vinyl wrap. A complete wrap of the current SQ8 body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 76 ft (23 m).

1generations20.5 mof film for a full wrap

Audi SQ8, first generation, factory photo
Audi SQ8, first generation. Factory color shown.

Audi SQ8 wrap colors and ideas

  • Audi SQ8 black wrap
  • Audi SQ8 white wrap
  • Audi SQ8 gray wrap
  • Audi SQ8 silver wrap
  • Audi SQ8 red wrap
  • Audi SQ8 blue wrap
  • Audi SQ8 green wrap
  • Audi SQ8 yellow wrap
  • Audi SQ8 orange wrap
  • Audi SQ8 purple wrap
  • Audi SQ8 pink wrap
  • Audi SQ8 teal wrap
  • Audi SQ8 brown wrap
  • Audi SQ8 gold wrap
  • Audi SQ8 chrome wrap
  • Audi SQ8 color shift wrap
  • Audi SQ8 carbon fiber wrap
  • Audi SQ8 camo and patterned wrap

How much vinyl to wrap an Audi SQ8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)197.1 in (5,006 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Audi SQ8 wrap cost factors

The Audi SQ8 wrap cost depends mainly on the amount of film and the time spent on cut-outs. The body uses about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film pushes the amount to about 76 ft (23 m), and the extra work around sensors, cameras, and fog lamps adds labor.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Audi SQ8 wraps by generation

Swipe sideways. Tap a card for the full description.

Audi SQ8, first generation, factory photo
Factory color shown

2019–now Audi SQ8 SUV (first generation)

2019–nowSUV (5 doors)197.1 in (5,006 mm)

The first generation Audi SQ8 began production in 2019 and received a restyling in 2023. The update altered the front and rear bumpers along with the lights, so pre-2023 and post-2023 cars need different film templates. Installers must check the production year before cutting film for the bumpers.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Audi SQ8

If a full wrap is not what you need, an Audi SQ8 chrome delete covers the window trim and badges with black film. A partial wrap on the roof, hood, or mirror caps changes the look without wrapping the whole SUV. Paint protection film (PPF) is a clear option that guards the front end from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi SQ8: body, cut-outs and film

The Audi SQ8 is a five-door SUV, and its length of 197.1 in (5,006 mm) means a full Audi SQ8 vinyl wrap uses more film than smaller crossovers. The tall sides and wide rear hatch add surface area, so installers plan seams carefully. Because the body has no separate trunk, the tailgate is a single large panel that demands a wide, unbroken piece of film.

When planning Audi SQ8 wrap ideas, remember that every trim has parking sensors in the bumpers. The film must be cut around each sensor, and the same applies to the cameras set into the body. Every trim also has fog lamps in the front bumper, so those areas need precise cut-outs in the film.

To work out how much vinyl to wrap an Audi SQ8, you only need the first generation, which runs from 2019 onward. The 2023 restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you count film for a full wrap, use the estimate for the body style you have.

Questions about wrapping an Audi SQ8

How much vinyl does it take to wrap an Audi SQ8?

You need about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap an Audi SQ8. For chrome or patterned film, plan on about 76 ft (23 m) because the material is less flexible and requires more waste.

Which years of the Audi SQ8 take the same film cuts?

The Audi SQ8 has one generation, but the 2023 restyling split it into two film-cut versions. Cars built from 2019 to 2022 share one set of bumper and light templates. Cars built from 2023 onward use different templates for those parts.

Can I wrap only the hood or the roof of an Audi SQ8?

Yes, you can wrap only the hood or the roof of an Audi SQ8. A partial wrap on the roof, hood, or mirror caps is a standard job that uses less film than a full wrap.

Is an Audi SQ8 hard to wrap?

An Audi SQ8 is not the easiest vehicle to wrap because of its size and the sensors and cameras on every trim. Installers must cut the film around each parking sensor, camera lens, and fog lamp. The large tailgate and the 197.1 in (5,006 mm) length also add time to the job.