Wraps by car

Audi RS Q3 Sportback wrap

An Audi RS Q3 Sportback wrap covers the full body of this compact performance SUV with vinyl wrap. Audi builds one generation of the RS Q3 Sportback, in production from 2019 to the present. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This page explains the body sizes, tricky areas, and partial wrap options for the RS Q3 Sportback.

1generations15.5 mof film for a full wrap

Audi RS Q3 Sportback, first generation, factory photo
Audi RS Q3 Sportback, first generation. Factory color shown.

Audi RS Q3 Sportback wrap colors and ideas

  • RS Q3 Sportback black wrap
  • RS Q3 Sportback white wrap
  • RS Q3 Sportback gray wrap
  • RS Q3 Sportback silver wrap
  • RS Q3 Sportback red wrap
  • RS Q3 Sportback blue wrap
  • RS Q3 Sportback green wrap
  • RS Q3 Sportback yellow wrap
  • RS Q3 Sportback orange wrap
  • RS Q3 Sportback purple wrap
  • RS Q3 Sportback pink wrap
  • RS Q3 Sportback teal wrap
  • RS Q3 Sportback brown wrap
  • RS Q3 Sportback gold wrap
  • RS Q3 Sportback chrome wrap
  • RS Q3 Sportback color shift wrap
  • RS Q3 Sportback carbon fiber wrap
  • RS Q3 Sportback camo and patterned wrap

How much vinyl to wrap an Audi RS Q3 Sportback

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)177.4 in (4,507 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

RS Q3 Sportback wrap cost factors

An RS Q3 Sportback wrap cost depends on film choice, body size, and labor. The body length of 177.4 in (4,507 mm) and the glass roof affect how much film is used. A standard color change takes about 51 ft (15.5 m) of cast film, while chrome or patterned film takes about 59 ft (18 m). The panoramic glass roof reduces the film needed for the roof panel.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

RS Q3 Sportback wraps by generation

Swipe sideways. Tap a card for the full description.

Audi RS Q3 Sportback, first generation, factory photo
Factory color shown

2019–now RS Q3 Sportback SUV (first generation)

2019–nowSUV (5 doors)177.4 in (4,507 mm)

The first generation RS Q3 Sportback has a panoramic glass roof on every trim. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The roof film ends at the roof rails, leaving the glass exposed. That cuts a little film from the estimate but adds trimming work around the opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an RS Q3 Sportback

Partial wrap jobs on an RS Q3 Sportback can be done without covering the entire body. For a partial wrap, the hood, mirror caps, and tailgate are wrapped in color change film. A chrome delete covers the window trim and badges with black film. Paint protection film on the front end uses clear film to guard the hood and bumper from stone chips.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi RS Q3 Sportback: body, cut-outs and film

An Audi RS Q3 Sportback vinyl wrap covers one SUV body style with five doors. The body measures 177.4 in (4,507 mm) in length, which keeps the wrap area compact for an SUV. A single roll of 60-inch (1.52 m) film can be used for the main body panels without excessive waste. The sloping Sportback tailgate adds a bit of film length compared with a squared-off rear.

RS Q3 Sportback wrap ideas should account for several parts that need cut-outs or removal. Every trim has a panoramic glass roof, so the roof film ends at the roof rails and the glass is not wrapped. A tailgate with the rear glass in it means the film ends at the edge of the glass. Parking sensors in the bumpers and cameras in the body are cut around each sensor and lens.

How much vinyl to wrap an RS Q3 Sportback depends on the generation, but there is only one generation in the catalog. The first generation, production years 2019 to now, uses about 51 ft (15.5 m) of cast film. If you choose chrome or patterned film, the estimate is about 59 ft (18 m). Because the body has not changed, the film estimate stays the same for all production years.

Questions about wrapping an Audi RS Q3 Sportback

How much vinyl does it take to wrap an Audi RS Q3 Sportback?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap an Audi RS Q3 Sportback. That figure is for a full color change wrap of the newest body. If you use chrome or patterned film, the estimate is about 59 ft (18 m). The estimate stays the same for all years of the first generation.

Can the roof of an RS Q3 Sportback be wrapped?

No, the roof of an RS Q3 Sportback cannot be wrapped like a normal panel. Every trim has a panoramic glass roof, and glass is not wrapped. The film on the roof ends at the roof rails, so the glass stays dark. You can wrap the roof rails themselves if you want a color change there.

Can I wrap only the hood or the roof of an RS Q3 Sportback?

Yes, you can wrap only the hood or the roof of an RS Q3 Sportback. A partial wrap can cover the hood, mirror caps, and tailgate. The roof has glass, so the roof film is only on the sides and stops at the rails. A partial hood wrap is possible on its own as a smaller job.

Is an RS Q3 Sportback hard to wrap?

An RS Q3 Sportback has some tricky areas that add work to a wrap. The panoramic glass roof means the film ends at the roof rails and the glass is not wrapped, requiring precise cutting. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The body length of 177.4 in (4,507 mm) is not extreme, but the sensors and cameras need cut-outs.