Wraps by car

Audi e-tron GT wrap

The Audi e-tron GT wrap page covers the first generation of this luxury electric sedan, built since 2021 and restyled in 2024. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 66 ft (20 m). This page gives the sizes, the wrap ideas and the answers you need before covering the car.

1generations15 mof film for a full wrap

Audi e-tron GT, first generation, factory photo
Audi e-tron GT, first generation. Factory color shown.

Audi e-tron GT wrap colors and ideas

  • e-tron GT black wrap
  • e-tron GT white wrap
  • e-tron GT gray wrap
  • e-tron GT silver wrap
  • e-tron GT red wrap
  • e-tron GT blue wrap
  • e-tron GT green wrap
  • e-tron GT yellow wrap
  • e-tron GT orange wrap
  • e-tron GT purple wrap
  • e-tron GT pink wrap
  • e-tron GT teal wrap
  • e-tron GT brown wrap
  • e-tron GT gold wrap
  • e-tron GT chrome wrap
  • e-tron GT color shift wrap
  • e-tron GT carbon fiber wrap
  • e-tron GT camo and patterned wrap

How much vinyl to wrap an Audi e-tron GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowsedan (4 doors)196.4 in (4,989 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

e-tron GT wrap cost factors

The e-tron GT wrap cost depends on the film choice and the labor for the parts that need cut-outs. The body is 196.4 in (4,989 mm) long, so a full wrap uses about 49 ft (15 m) of cast film. The glass roof is not wrapped, which saves a little material, but the sensors and cameras take extra time. A chrome delete with patterned film uses about 66 ft (20 m) and adds more cutting work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

e-tron GT wraps by generation

Swipe sideways. Tap a card for the full description.

Audi e-tron GT, first generation, factory photo
Factory color shown

2021–now e-tron GT sedan (first generation)

2021–nowsedan (4 doors)196.4 in (4,989 mm)

The first generation e-tron GT has a panoramic glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The glass runs from the windshield to the rear window and leaves only the roof rails for the vinyl. If you want the roof to match the wrap color, the film ends at the rails and the glass remains black. A roof wrap on this car is therefore a partial job around the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an e-tron GT

The e-tron GT chrome delete and partial wrap are the jobs smaller than a full color change. A partial wrap can cover the hood, the mirror caps or the trunk lid with the same film as a full wrap. The chrome delete covers the window trim, the decorative moldings and the badges with black film. Paint protection film (PPF) is clear film on the front end to guard the bumper, the hood and the fenders.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi e-tron GT: body, cut-outs and film

The Audi e-tron GT vinyl wrap has to follow a long, wide sedan body that measures 196.4 in (4,989 mm). The four doors and the bumpers are wrapped as separate panels, so the installer has more seams to manage than on a small coupe. The film is laid over the body lines without shrinking, because the panels are wide and relatively flat. The estimate of about 49 ft (15 m) allows for the doors, the fenders and the trunk lid with little waste.

The e-tron GT wrap ideas start with the parts that cannot be covered in one piece. Every trim has a panoramic glass roof, so the film ends at the roof rails and no vinyl goes on the glass. The bright decorative moldings stay bright next to the film unless a chrome delete covers them. The parking sensors in the bumpers and the cameras in the body are cut around each sensor and lens. The charge port door is wrapped as a small piece of its own.

When you count how much vinyl to wrap an e-tron GT, the first generation has only one body style from 2021 to now. The restyling in 2024 changed the front and rear fascias, so the cuts for the bumpers differ between early and late cars. The roof, the doors and the trunk lid share the same pattern across the generation. A full wrap always takes the same film estimate of about 49 ft (15 m).

Questions about wrapping an Audi e-tron GT

How much vinyl does it take to wrap an Audi e-tron GT?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap an Audi e-tron GT. This estimate covers the full body of the first generation sedan, including the doors and the trunk lid. The glass roof is not wrapped, so the film needed is less than on a car with a metal roof. Installers add a little extra for the cut-outs around the sensors and cameras.

Can the roof of an e-tron GT be wrapped?

No, the roof of an e-tron GT cannot be wrapped because every trim has a panoramic glass roof. The glass is not a surface for vinyl, so the film ends at the roof rails. The roof stays dark whatever the color of the wrap on the body.

Which years of the e-tron GT take the same film cuts?

The first generation e-tron GT from 2021 to now takes the same film cuts for the roof, the doors and the trunk lid. The 2024 restyling changed the front and rear fascias, so the bumper cuts differ between early and late cars. For a full wrap, the estimate of about 49 ft (15 m) stays the same.

Can I wrap only the hood or the roof of an e-tron GT?

Yes, you can wrap only the hood or the roof of an e-tron GT as a partial job. The partial wrap covers the hood, the mirror caps or the trunk lid. The roof is glass, so a roof wrap is not offered. A chrome delete covers the window trim, the moldings and the badges.