Wraps by car

Audi A1 Citycarver wrap

The Audi A1 Citycarver wrap is a color change wrap for the subcompact five-door SUV built since 2019. The catalog covers one generation of the Audi A1 Citycarver, the first and current body. A full vinyl wrap of this car takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Audi A1 Citycarver, first generation, factory photo
Audi A1 Citycarver, first generation. Factory color shown.

Audi A1 Citycarver wrap colors and ideas

  • A1 Citycarver black wrap
  • A1 Citycarver white wrap
  • A1 Citycarver gray wrap
  • A1 Citycarver silver wrap
  • A1 Citycarver red wrap
  • A1 Citycarver blue wrap
  • A1 Citycarver green wrap
  • A1 Citycarver yellow wrap
  • A1 Citycarver orange wrap
  • A1 Citycarver purple wrap
  • A1 Citycarver pink wrap
  • A1 Citycarver teal wrap
  • A1 Citycarver brown wrap
  • A1 Citycarver gold wrap
  • A1 Citycarver chrome wrap
  • A1 Citycarver color shift wrap
  • A1 Citycarver carbon fiber wrap
  • A1 Citycarver camo and patterned wrap

How much vinyl to wrap an Audi A1 Citycarver

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)159.3 in (4,046 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

A1 Citycarver wrap cost factors

An A1 Citycarver wrap cost depends on the film type, the amount of disassembly, and the condition of the paint. The car is 159.3 in (4,046 mm) long, so a full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) film. Chrome delete and paint protection film add separate material and labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

A1 Citycarver wraps by generation

Swipe sideways. Tap a card for the full description.

Audi A1 Citycarver, first generation, factory photo
Factory color shown

2019–now A1 Citycarver SUV (first generation)

2019–nowSUV (5 doors)159.3 in (4,046 mm)

The first generation Audi A1 Citycarver is a subcompact SUV with a length of 159.3 in (4,046 mm). Its small size means fewer panels than a mid-size SUV, so a wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. The five-door body has a tailgate with the rear glass in it, which needs trimming at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an A1 Citycarver

A partial wrap on an Audi A1 Citycarver can cover the roof, hood, or mirror caps. A1 Citycarver chrome delete wraps the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear film applied to the bumper, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Audi A1 Citycarver: body, cut-outs and film

An Audi A1 Citycarver vinyl wrap covers a short body of 159.3 in (4,046 mm) and five doors. The compact size keeps the wrap job small, with fewer panels than a larger SUV. The body style has a standard two-box shape with a hatch, without sharp edges that add labor.

A1 Citycarver wrap ideas often start with the tailgate, which has the rear glass in it. The film on the tailgate ends at the edge of the glass, so the installer trims the film to that line. The door handles, mirrors, and badges come off for a clean wrap, and the door jambs are not wrapped.

To figure how much vinyl to wrap an A1 Citycarver, use the film estimate of the first and only generation. The body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 62 ft (19 m) because the pattern repeat adds waste.

Questions about wrapping an Audi A1 Citycarver

How much vinyl does it take to wrap an Audi A1 Citycarver?

A full wrap of an Audi A1 Citycarver takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The estimate comes from the first generation body, which measures 159.3 in (4,046 mm) long. For chrome or patterned film, plan for about 62 ft (19 m).

Can I wrap only the hood or the roof of an A1 Citycarver?

Yes, you can wrap only the hood or the roof of an A1 Citycarver. Other partial options include the mirror caps, window trim, and badges. Paint protection film is also applied to the front end as a smaller job.

Is an A1 Citycarver hard to wrap?

The A1 Citycarver is not very hard to wrap, but the tailgate adds a step. The rear glass is in the tailgate, so the installer must trim the film at the edge of the glass. The car's short length of 159.3 in (4,046 mm) means fewer panels to handle.

How many generations of the A1 Citycarver does this page cover?

This page covers one generation of the Audi A1 Citycarver. The first generation has been produced since 2019 and is the only generation in the catalog.