An Audi S7 wrapped in yellow starts with choosing the finish, from flat matte to high gloss. A matte film hides small paint flaws but shows finger marks on door edges. A satin film lands between matte and gloss with a soft shine. A gloss film reflects the most light and shows every curve of the body.
Factory paint on the S7 matters because the film does not hide deep chips or peeling clear coat. The liftback tailgate on every S7 has the rear glass in it, so the film ends at the edge of the glass. On the first generation some trims have bright decorative moldings that stay bright next to the film. On the second generation every trim has parking sensors in the bumpers, so the film is cut around each sensor. These details decide where seams fall on the wrap.
A yellow wrap on the S7 is removable, and the film comes off with heat and a slow pull. The factory paint is not harmed when the wrap is removed correctly. Hand wash the car with a soft mitt and pH-neutral soap. Avoid automatic brushes that can lift the film edges.
