Wraps by car

Austin Healey 100 wrap

The Austin Healey 100 wrap guide covers the first generation of this open two-seater, produced from 1953 to 1956. A full vinyl wrap of the 157.5 in (4,001 mm) body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds more surface because those designs are matched across panels, bringing the total to about 48 ft (14.5 m).

1generations11 mof film for a full wrap

Austin Healey 100, first generation, factory photo
Austin Healey 100, first generation. Factory color shown.

Austin Healey 100 wrap colors and ideas

  • Austin Healey 100 black wrap
  • Austin Healey 100 white wrap
  • Austin Healey 100 gray wrap
  • Austin Healey 100 silver wrap
  • Austin Healey 100 red wrap
  • Austin Healey 100 blue wrap
  • Austin Healey 100 green wrap
  • Austin Healey 100 yellow wrap
  • Austin Healey 100 orange wrap
  • Austin Healey 100 purple wrap
  • Austin Healey 100 pink wrap
  • Austin Healey 100 teal wrap
  • Austin Healey 100 brown wrap
  • Austin Healey 100 gold wrap
  • Austin Healey 100 chrome wrap
  • Austin Healey 100 color shift wrap
  • Austin Healey 100 carbon fiber wrap
  • Austin Healey 100 camo and patterned wrap

How much vinyl to wrap an Austin Healey 100

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1953–1956convertible (2 doors)157.5 in (4,001 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Austin Healey 100 wrap cost factors

The Austin Healey 100 wrap cost depends on film type, surface condition, and how much of the 157.5 in (4,001 mm) body is covered. A standard color change uses about 36 ft (11 m) of film, while chrome or patterned film needs about 48 ft (14.5 m). Removing trim and wrapping the folding hard top panels adds labor. Paint correction before wrapping also affects the final cost.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Austin Healey 100 wraps by generation

Swipe sideways. Tap a card for the full description.

Austin Healey 100, first generation, factory photo
Factory color shown

1953–1956 Austin Healey 100 convertible (first generation)

1953–1956convertible (2 doors)157.5 in (4,001 mm)

On the first generation Austin Healey 100, the open top is not wrapped because it is fabric and would not hold film. The wrap ends where the fabric top begins, along the top edge of the doors and across the rear deck. A folding hard top, if the car has one, is wrapped as separate panels of its own. This keeps the vinyl from bridging onto a surface that flexes and changes shape.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an Austin Healey 100

A partial wrap on an Austin Healey 100 can cover the hood, mirror caps, and rear deck with vinyl. Chrome delete covers the window trim and badges with black film, changing brightwork without removing it. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less than the 36 ft (11 m) of a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Austin Healey 100: body, cut-outs and film

An Austin Healey 100 vinyl wrap follows the simple two-door convertible body, with no fixed roof to cover. The body is 157.5 in (4,001 mm) long, and its open shape means the film ends cleanly at the top of the doors and rear deck. Installers can wrap the body without working around a glass roof or large roof panel. This keeps the wrap layout straightforward and the film use close to the 36 ft (11 m) estimate.

Austin Healey 100 wrap ideas should account for the chrome trim, door handles, and badges on this car. These parts are removed or cut around so the film sits flat against the panels. The fabric top is not wrapped, and the film ends where the top begins, leaving a neat edge below the side windows. A folding hard top, if fitted, is wrapped as separate panels of its own.

How much vinyl to wrap an Austin Healey 100 depends on the single generation body from 1953–1956. The catalog shows one body style for this car, the two-door convertible, so there are no later roof or panel changes to add surface. Film estimates are based on that body: about 36 ft (11 m) of 60-inch (1.52 m) film for a standard color change. Chrome or patterned film raises the figure to about 48 ft (14.5 m) because matching patterns across panels uses more material.

More Austin Healey wraps

Questions about wrapping an Austin Healey 100

How much vinyl does it take to wrap an Austin Healey 100?

A full wrap of an Austin Healey 100 takes about 36 ft (11 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film needs about 48 ft (14.5 m) because the pattern must be matched across panels. These figures come from the film estimate for the newest body, the 1953–1956 convertible.

Is the top of an Austin Healey 100 wrapped?

No, the top of an Austin Healey 100 is not wrapped. The factory top is fabric, and vinyl film would not adhere or flex with it. The wrap ends where the fabric top begins, along the top edges of the doors and rear deck. A folding hard top, if fitted, can be wrapped as separate panels.

Can I wrap only the hood or the roof of an Austin Healey 100?

Yes, you can wrap only the hood or the rear deck of an Austin Healey 100. A partial wrap covers the hood, mirror caps, and rear deck as separate panels. Chrome delete is another option for the window trim and badges. Paint protection film (PPF) is a clear film for the front end only.

Is an Austin Healey 100 hard to wrap?

An Austin Healey 100 is not hard to wrap for an installer who handles classic cars, but it adds work in some areas. The 157.5 in (4,001 mm) body is compact, yet the chrome trim, door handles, and badges must be removed or cut around. The fabric top is not wrapped, so the film must be trimmed cleanly where the top begins. These details call for careful panel preparation on the 1953–1956 convertible.