Wraps by car

Austin Healey 3000 wrap

An Austin Healey 3000 wrap covers the entire painted body of this classic sports car with vinyl film. The catalog includes three generations of the Austin Healey 3000, from 1959 to 1967. A full wrap of the newest body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film.

3generations11 mof film for a full wrap

Austin Healey 3000, third generation, factory photo
Austin Healey 3000, third generation. Factory color shown.

Austin Healey 3000 wrap colors and ideas

  • Austin Healey 3000 black wrap
  • Austin Healey 3000 white wrap
  • Austin Healey 3000 gray wrap
  • Austin Healey 3000 silver wrap
  • Austin Healey 3000 red wrap
  • Austin Healey 3000 blue wrap
  • Austin Healey 3000 green wrap
  • Austin Healey 3000 yellow wrap
  • Austin Healey 3000 orange wrap
  • Austin Healey 3000 purple wrap
  • Austin Healey 3000 pink wrap
  • Austin Healey 3000 teal wrap
  • Austin Healey 3000 brown wrap
  • Austin Healey 3000 gold wrap
  • Austin Healey 3000 chrome wrap
  • Austin Healey 3000 color shift wrap
  • Austin Healey 3000 carbon fiber wrap
  • Austin Healey 3000 camo and patterned wrap

How much vinyl to wrap an Austin Healey 3000

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1967convertible (2 doors)157.5 in (4,001 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1961–1964convertible (2 doors)157.5 in (4,001 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1959–1961convertible (2 doors)157.5 in (4,001 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Austin Healey 3000 wrap cost factors

An Austin Healey 3000 wrap cost depends on the film type, the condition of the paint, and the number of panels covered. A full wrap of the 157.5 in (4,001 mm) body uses about 36 ft (11 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 48 ft (14.5 m) for the same coverage. Labor time increases if old paint needs correction or if the car has a folding hard top to wrap.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Austin Healey 3000 wraps by generation

Swipe sideways. Tap a card for the full description.

Austin Healey 3000, third generation, factory photo
Factory color shown

1964–1967 Austin Healey 3000 convertible (third generation)

1964–1967convertible (2 doors)157.5 in (4,001 mm)

The open top of the Austin Healey 3000 is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own if the owner wants it covered. The convertible body means the installer must trim the film cleanly along the top edges of the doors and rear deck.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Austin Healey 3000, second generation, factory photo
Factory color shown

1961–1964 Austin Healey 3000 convertible (second generation)

1961–1964convertible (2 doors)157.5 in (4,001 mm)

The 1962 restyling of the Austin Healey 3000 changed bumpers and lights, so film cut for one version does not fit the other. The second generation retains the same body length of 157.5 in (4,001 mm), but the front and rear details differ before and after the update. Installers must note the production year of the car to prepare accurate patterns.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Austin Healey 3000, first generation, factory photo
Factory color shown

1959–1961 Austin Healey 3000 convertible (first generation)

1959–1961convertible (2 doors)157.5 in (4,001 mm)

On a first-generation Austin Healey 3000 from 1959 to 1961, paint age is a key factor before wrapping. Panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. The body length is 157.5 in (4,001 mm), and the film estimate is the same as later cars.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an Austin Healey 3000

For an Austin Healey 3000 partial wrap, the hood, mirror caps, and rear deck are typical panels to cover with vinyl. An Austin Healey 3000 chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Austin Healey 3000: body, cut-outs and film

The Austin Healey 3000 is a two-door convertible in every generation, so the wrap ends where the fabric top begins. The body length is 157.5 in (4,001 mm) across all years, keeping film needs consistent. A folding hard top, if fitted, is wrapped as separate panels.

For an Austin Healey 3000 wrap ideas include the long hood, doors, and rear deck as the main panels. The fabric top is not wrapped, and the film ends where it begins. Chrome trim and badges can be left in place or covered with a chrome delete film.

When planning how much vinyl to wrap an Austin Healey 3000, the three generations share the same body length and style. The second generation was restyled in 1962 with different bumpers and lights, so film cut for one version does not fit the other. The first generation from 1959 to 1961 has the same length but different trim details. In all cases, a full wrap uses about 36 ft (11 m) of 60-inch (1.52 m) cast film.

More Austin Healey wraps

Questions about wrapping an Austin Healey 3000

How much vinyl does it take to wrap an Austin Healey 3000?

It takes about 36 ft (11 m) of 60-inch (1.52 m) cast film to wrap an Austin Healey 3000. That figure is for the newest body from 1964 to 1967, and all generations have the same length of 157.5 in (4,001 mm).

Is the top of an Austin Healey 3000 wrapped?

No, the fabric top of an Austin Healey 3000 is not wrapped, and the film ends where it begins. A folding hard top is wrapped as panels of its own if the car has one.

Can I wrap only the hood or the roof of an Austin Healey 3000?

Yes, a partial wrap on an Austin Healey 3000 can cover only the hood, mirror caps, or rear deck. The roof is the folding fabric top or hard top; the fabric is not wrapped, but a hard top can be wrapped as separate panels.

Is an Austin Healey 3000 hard to wrap?

An Austin Healey 3000 is not especially hard to wrap, but the convertible body and chrome trim add work. The fabric top requires careful trimming where the film ends, and the many curved panels on the 157.5 in (4,001 mm) body demand patience. A folding hard top, if present, must be wrapped as panels of its own.