Wraps by car

Avtokam 2160 wrap

The Avtokam 2160 wrap page covers the Avtokam 2160, a compact SUV made from 1990 to 1993. This first and only generation is a five-door SUV with a length of 135.0 in (3,430 mm). A full vinyl wrap of this small body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 54 ft (16.5 m).

1generations14.5 mof film for a full wrap

Avtokam 2160, first generation, factory photo
Avtokam 2160, first generation. Factory color shown.

Avtokam 2160 wrap colors and ideas

  • Avtokam 2160 black wrap
  • Avtokam 2160 white wrap
  • Avtokam 2160 gray wrap
  • Avtokam 2160 silver wrap
  • Avtokam 2160 red wrap
  • Avtokam 2160 blue wrap
  • Avtokam 2160 green wrap
  • Avtokam 2160 yellow wrap
  • Avtokam 2160 orange wrap
  • Avtokam 2160 purple wrap
  • Avtokam 2160 pink wrap
  • Avtokam 2160 teal wrap
  • Avtokam 2160 brown wrap
  • Avtokam 2160 gold wrap
  • Avtokam 2160 chrome wrap
  • Avtokam 2160 color shift wrap
  • Avtokam 2160 carbon fiber wrap
  • Avtokam 2160 camo and patterned wrap

How much vinyl to wrap an Avtokam 2160

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1993SUV (5 doors)135.0 in (3,430 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Avtokam 2160 wrap cost factors

The Avtokam 2160 wrap cost is set by the amount of film, the number of panels, and the time for preparation. A full wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) film for the small body. Paint correction on a car from 1990 to 1993 can add steps before the vinyl goes on. More complex film like chrome or patterned increases the material needed to about 54 ft (16.5 m).

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Avtokam 2160 wraps by generation

Swipe sideways. Tap a card for the full description.

Avtokam 2160, first generation, factory photo
Factory color shown

1990–1993 Avtokam 2160 SUV (first generation)

1990–1993SUV (5 doors)135.0 in (3,430 mm)

The first generation Avtokam 2160 was built from 1990 to 1993 in one five-door SUV style. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. The installer checks how the paint reacts to adhesive in a small hidden area first. That step avoids lifting old paint when the film is removed later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Avtokam 2160

A partial wrap on an Avtokam 2160 covers the roof, hood, or mirror caps instead of the whole body. Chrome delete on this SUV means covering the window trim and badges with black film. Paint protection film (PPF) can be put on the front end to stop stone chips. These smaller jobs use less material and leave most of the factory paint showing.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Avtokam 2160: body, cut-outs and film

An Avtokam 2160 vinyl wrap is a compact job because the SUV is only 135.0 in (3,430 mm) long. The single five-door body style means there is no need to choose between panels for a longer or shorter variant. Installers measure every panel before cutting to keep waste low on a car this size. The straight sides and flat rear make film application straightforward for someone with experience.

Avtokam 2160 wrap ideas start with the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass on that panel, so no cut-out is needed there. Door handles, mirrors, and badges are removed or masked for a clean edge. The small body leaves little room for large graphics, but a single color change works well.

How much vinyl to wrap an Avtokam 2160 depends on the film you choose and the condition of the paint. You need about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film adds about six feet, so figure about 54 ft (16.5 m). The single generation means the same estimate works for every Avtokam 2160 from 1990 to 1993.

Questions about wrapping an Avtokam 2160

How much vinyl does it take to wrap an Avtokam 2160?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is needed to wrap an Avtokam 2160. Chrome or patterned film takes about 54 ft (16.5 m) for the same full wrap. The small body of this SUV uses less film than a longer vehicle.

Can I wrap only the hood or the roof of an Avtokam 2160?

Yes, you can wrap only the hood or the roof of an Avtokam 2160. A partial wrap covers those panels or the mirror caps and uses less film than a full wrap. This is a good way to protect the paint or change the look without covering the whole car.

Is an Avtokam 2160 hard to wrap?

The Avtokam 2160 is not hard to wrap, but the tailgate with the rear glass in it needs care. The film ends at the edge of the glass on that panel, so the line must be cut straight. The small size of the SUV means there are fewer panels to cover, which makes the job quicker.

How many generations of the Avtokam 2160 does this page cover?

This page covers one generation of the Avtokam 2160, made from 1990 to 1993. There is only one generation in the catalog, so all Avtokam 2160 wraps use the same dimensions and film estimates.