Wraps by car

Avtokam 3101 wrap

The Avtokam 3101 wrap page covers the single generation of this compact SUV produced from 1990 to 1993. A full vinyl wrap of the Avtokam 3101 uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The page also lists film needs for chrome or patterned finishes at about 54 ft (16.5 m).

1generations14.5 mof film for a full wrap

Avtokam 3101, first generation, factory photo
Avtokam 3101, first generation. Factory color shown.

Avtokam 3101 wrap colors and ideas

  • Avtokam 3101 black wrap
  • Avtokam 3101 white wrap
  • Avtokam 3101 gray wrap
  • Avtokam 3101 silver wrap
  • Avtokam 3101 red wrap
  • Avtokam 3101 blue wrap
  • Avtokam 3101 green wrap
  • Avtokam 3101 yellow wrap
  • Avtokam 3101 orange wrap
  • Avtokam 3101 purple wrap
  • Avtokam 3101 pink wrap
  • Avtokam 3101 teal wrap
  • Avtokam 3101 brown wrap
  • Avtokam 3101 gold wrap
  • Avtokam 3101 chrome wrap
  • Avtokam 3101 color shift wrap
  • Avtokam 3101 carbon fiber wrap
  • Avtokam 3101 camo and patterned wrap

How much vinyl to wrap an Avtokam 3101

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1993SUV (3 doors)135.0 in (3,430 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Avtokam 3101 wrap cost factors

Avtokam 3101 wrap cost depends on the size of the car and the amount of film it uses. The first generation needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film raises the estimate to about 54 ft (16.5 m). The number of cut-outs and trim pieces also affects the labor.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Avtokam 3101 wraps by generation

Swipe sideways. Tap a card for the full description.

Avtokam 3101, first generation, factory photo
Factory color shown

1990–1993 Avtokam 3101 SUV (first generation)

1990–1993SUV (3 doors)135.0 in (3,430 mm)

The first generation Avtokam 3101 from 1990 to 1993 is a three-door SUV. Paint age matters on a car of these years, because panels may be original or repainted. A test spot comes before a full wrap to check adhesion. The tailgate has glass in it, and the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Avtokam 3101

An Avtokam 3101 chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, hood, or mirror caps. Paint protection film (PPF), clear film on the front end, protects the nose and fenders. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Avtokam 3101: body, cut-outs and film

The Avtokam 3101 vinyl wrap benefits from its three-door SUV body, which keeps the side panels large and the roof small. The car measures 135.0 in (3,430 mm) long, so a full wrap is a compact job for a shop. The two long side doors are each covered with one large piece of film. The tailgate has glass set into it, and the film ends at the edge of that glass.

Avtokam 3101 wrap ideas include working around the tailgate's rear glass, where the film stops at the glass edge. The two long doors can be wrapped as single pieces, but the handles and mirrors need cut-outs or removal. The roof and hood are small, so pattern alignment is simple. A chrome delete on the window trim is also possible.

How much vinyl to wrap an Avtokam 3101 depends on the film type, and this page gives one figure per generation. A full wrap of the first generation uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 54 ft (16.5 m). There is only one generation in the catalog.

Questions about wrapping an Avtokam 3101

How much vinyl does it take to wrap an Avtokam 3101?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is needed to wrap an Avtokam 3101. This figure is for a full wrap of the newest body in the catalog. For chrome or patterned film, the estimate is about 54 ft (16.5 m).

Can I wrap only the hood or the roof of an Avtokam 3101?

Yes, you can wrap only the hood or the roof of an Avtokam 3101. A partial wrap can also cover the mirror caps. The roof and hood are small panels, so they use less film than a full wrap.

Is an Avtokam 3101 hard to wrap?

The Avtokam 3101 adds work because the tailgate has glass set into it, and the film must end at the edge of the glass. The two long side doors are each one large piece, which needs careful handling but no seams. The car is small at 135.0 in (3,430 mm) long, so the total wrap area is modest.

How many generations of the Avtokam 3101 does this page cover?

This page covers one generation of the Avtokam 3101, produced from 1990 to 1993. The catalog lists only the first generation for this model.