Wraps by car

Avatr 11 wrap

The Avatr 11 wrap page covers the SUV produced since 2023. It explains what a full vinyl wrap of this electric car involves. The catalog lists one generation of the Avatr 11. A complete wrap of the current body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Avatr 11, first generation, factory photo
Avatr 11, first generation. Factory color shown.

Avatr 11 wrap colors and ideas

  • Avatr 11 black wrap
  • Avatr 11 white wrap
  • Avatr 11 gray wrap
  • Avatr 11 silver wrap
  • Avatr 11 red wrap
  • Avatr 11 blue wrap
  • Avatr 11 green wrap
  • Avatr 11 yellow wrap
  • Avatr 11 orange wrap
  • Avatr 11 purple wrap
  • Avatr 11 pink wrap
  • Avatr 11 teal wrap
  • Avatr 11 brown wrap
  • Avatr 11 gold wrap
  • Avatr 11 chrome wrap
  • Avatr 11 color shift wrap
  • Avatr 11 carbon fiber wrap
  • Avatr 11 camo and patterned wrap

How much vinyl to wrap an Avatr 11

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)192.1 in (4,880 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Avatr 11 wrap cost factors

The Avatr 11 wrap cost depends on the film, the finish, and the labor for its features. The car is 192.1 in (4,880 mm) long, which sets the base amount of film. A chrome or patterned film uses about 62 ft (19 m) instead of 56 ft (17 m). The glass roof and cameras add cutting time but not film cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Avatr 11 wraps by generation

Swipe sideways. Tap a card for the full description.

Avatr 11, first generation, factory photo
Factory color shown

2023–now Avatr 11 SUV (first generation)

2023–nowSUV (5 doors)192.1 in (4,880 mm)

The first generation Avatr 11 has a fixed glass roof on every trim. The glass is not wrapped, so the roof stays dark whatever the color of the film. This keeps the upper look consistent across all wrap colors. Installers end the roof film at the rails and leave the glass untouched.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Avatr 11

An Avatr 11 chrome delete covers the window trim and badges with black film. A partial wrap can include the hood, mirror caps, tailgate, and rear spoiler. Paint protection film (PPF) is clear film applied to the front end. These jobs use less film than a full wrap and focus on specific areas.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Avatr 11: body, cut-outs and film

The Avatr 11 vinyl wrap job starts with its five-door SUV body. The car is 192.1 in (4,880 mm) long, which is a full-size project for one installer. Its single body style means every wrap follows the same panel layout. The film estimate accounts for the large roof and tall sides.

Avatr 11 wrap ideas often focus on the details that need extra work. Every trim has a panoramic glass roof, so the film stops at the roof rails. Cameras in the body require cutting the film around each lens. The charge port door is wrapped as a small separate piece. The tailgate includes the rear glass, and the film ends at its edge.

How much vinyl to wrap an Avatr 11 depends on the film type and the generation. The first generation is the only one, so its estimate is the same for all years. A chrome or patterned film needs about 62 ft (19 m) because of pattern matching. A solid color wrap takes less film and less planning.

Questions about wrapping an Avatr 11

How much vinyl does it take to wrap an Avatr 11?

A full wrap of an Avatr 11 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. That figure covers the first generation body from 2023 onward. A chrome or patterned film needs about 62 ft (19 m) due to pattern matching.

Can the roof of an Avatr 11 be wrapped?

No, the roof of an Avatr 11 is not wrapped because it is glass. Every trim has a panoramic glass roof. The film ends at the roof rails, and the glass remains exposed.

Can I wrap only the hood or the roof of an Avatr 11?

You can wrap only the hood or the roof of an Avatr 11 as a partial job. The hood is one of the panels offered in a partial wrap. The roof is glass and cannot be wrapped. A partial wrap can also include the mirror caps, tailgate, or rear spoiler.

Is an Avatr 11 hard to wrap?

An Avatr 11 is not the hardest car to wrap, but it has several features that add work. The car is 192.1 in (4,880 mm) long, which means more film and longer seams. Cameras in the body require precise cutting around each lens. The charge port door is a small, detailed piece. The tailgate with integrated rear glass also needs careful film termination.