Wraps by car

Avatr 12 wrap

The Avatr 12 wrap page covers the first generation of this mid-size electric sedan, produced from 2023 to now. It lists the vinyl wrap needed for a full color change on the 197.6 in (5,020 mm) long body. The page also explains partial wrap options and the parts that require extra work.

1generations19 mof film for a full wrap

Avatr 12, first generation, factory photo
Avatr 12, first generation. Factory color shown.

Avatr 12 wrap colors and ideas

  • Avatr 12 black wrap
  • Avatr 12 white wrap
  • Avatr 12 gray wrap
  • Avatr 12 silver wrap
  • Avatr 12 red wrap
  • Avatr 12 blue wrap
  • Avatr 12 green wrap
  • Avatr 12 yellow wrap
  • Avatr 12 orange wrap
  • Avatr 12 purple wrap
  • Avatr 12 pink wrap
  • Avatr 12 teal wrap
  • Avatr 12 brown wrap
  • Avatr 12 gold wrap
  • Avatr 12 chrome wrap
  • Avatr 12 color shift wrap
  • Avatr 12 carbon fiber wrap
  • Avatr 12 camo and patterned wrap

How much vinyl to wrap an Avatr 12

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowsedan (4 doors)197.6 in (5,020 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Avatr 12 wrap cost factors

The Avatr 12 wrap cost depends on the film type, the body coverage, and the labor for the car's size of 197.6 in (5,020 mm). Chrome or patterned film takes about 74 ft (22.5 m), which raises material use compared to a standard color change. Removing and reinstalling parts like the charge port door and badges adds time. A partial wrap or chrome delete costs less in materials than a full wrap.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Avatr 12 wraps by generation

Swipe sideways. Tap a card for the full description.

Avatr 12, first generation, factory photo
Factory color shown

2023–now Avatr 12 sedan (first generation)

2023–nowsedan (4 doors)197.6 in (5,020 mm)

The first generation Avatr 12 is a mid-size sedan that measures 197.6 in (5,020 mm) in length. That size and the four-door body mean a full wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film. The long roof panel and tall doors are the largest single pieces. The number of panels is typical for a sedan, with separate sections for the bumpers and rocker panels.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Avatr 12

An Avatr 12 chrome delete covers the window trim and badges with black film. A partial wrap can be limited to the roof, hood, and mirror caps. Paint protection film (PPF) is applied as clear film on the front end. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Avatr 12: body, cut-outs and film

The Avatr 12 vinyl wrap is shaped by the car's sedan body style with four doors and a length of 197.6 in (5,020 mm). A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film for a standard color change. The large roof and long side panels are the main areas that consume film. Precise cutting around the door handles and trim keeps the wrap clean.

Avatr 12 wrap ideas must account for the charge port door, which is wrapped as a small piece of its own. The door handles, badges, and window trim are removed or masked for a neat finish. The front bumper and side mirrors need careful relief cuts to avoid lifting. Planning these cut-outs before installation saves film and time.

When you calculate how much vinyl to wrap an Avatr 12, the first generation is the only body style in the catalog. There are no differences between earlier and later model years for film quantity. The same measurements apply to every 2023–now sedan. A full wrap always uses about 62 ft (19 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Avatr 12

How much vinyl does it take to wrap an Avatr 12?

A full wrap of an Avatr 12 takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 74 ft (22.5 m). The exact amount depends on the installer's cutting plan and waste. The car's length of 197.6 in (5,020 mm) drives the total.

Can I wrap only the hood or the roof of an Avatr 12?

Yes, you can wrap only the hood or the roof of an Avatr 12. A partial wrap on this car typically includes the roof, hood, and mirror caps. The hood is a single panel that needs about 5 ft (1.5 m) of film. The roof takes slightly more because of its length.

Is an Avatr 12 hard to wrap?

An Avatr 12 is not hard to wrap for an experienced installer, but the charge port door adds a small extra piece. The car's length of 197.6 in (5,020 mm) means longer stretches of film on the roof and sides. The door handles and badges must be removed or cut around for a clean result. Careful handling of the charge port area avoids misalignment.

How many generations of the Avatr 12 does this page cover?

This page covers one generation of the Avatr 12, the first generation from 2023 to now. There are no other body styles listed in the catalog. All information, including the film estimate of about 62 ft (19 m), applies to that generation.