Wraps by car

Bollinger B1 wrap

This Bollinger B1 wrap page covers the B1 SUV in full, its single generation, and the film a full wrap of the newest body takes. The Bollinger B1 is an electric SUV that has been produced since 2022. A complete vinyl wrap on this vehicle uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Bollinger B1, first generation, factory photo
Bollinger B1, first generation. Factory color shown.

Bollinger B1 wrap colors and ideas

  • Bollinger B1 black wrap
  • Bollinger B1 white wrap
  • Bollinger B1 gray wrap
  • Bollinger B1 silver wrap
  • Bollinger B1 red wrap
  • Bollinger B1 blue wrap
  • Bollinger B1 green wrap
  • Bollinger B1 yellow wrap
  • Bollinger B1 orange wrap
  • Bollinger B1 purple wrap
  • Bollinger B1 pink wrap
  • Bollinger B1 teal wrap
  • Bollinger B1 brown wrap
  • Bollinger B1 gold wrap
  • Bollinger B1 chrome wrap
  • Bollinger B1 color shift wrap
  • Bollinger B1 carbon fiber wrap
  • Bollinger B1 camo and patterned wrap

How much vinyl to wrap a Bollinger B1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)171.5 in (4,356 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Bollinger B1 wrap cost factors

Bollinger B1 wrap cost depends on the amount of film, the height of the body, and the number of cut-outs and edges. The B1 measures 171.5 in (4,356 mm) long and 72.7 in (1,847 mm) high, so a full wrap uses about 61 ft (18.5 m) of film. The roof and the charge port door are additional steps that a shop must include in the labor.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (72.7 in (1,847 mm)): the roof is wrapped from a platform.

Bollinger B1 wraps by generation

Swipe sideways. Tap a card for the full description.

Bollinger B1, first generation, factory photo
Factory color shown

2022–now Bollinger B1 SUV (first generation)

2022–nowSUV (5 doors)171.5 in (4,356 mm)

The first generation Bollinger B1, produced from 2022 to now, is a tall five-door SUV that measures 72.7 in (1,847 mm) high. The height of the body means the roof is wrapped from a platform and takes more time. The rest of the body has the flat panels and separate charge port door described on this page.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (72.7 in (1,847 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Bollinger B1

A partial wrap on a Bollinger B1 can cover the roof, hood, or mirror caps as smaller jobs. Chrome delete covers the window trim and badges with black film to change the bright trim. Paint protection film (PPF) is clear film that a shop can apply to the front end of the B1.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bollinger B1: body, cut-outs and film

A Bollinger B1 vinyl wrap has to handle a tall, boxy SUV body that measures 171.5 in (4,356 mm) long and 72.7 in (1,847 mm) high. The five-door body style gives a large, flat surface area with long side panels and a tall roof. The simple shape makes the main panels straightforward to cover, but the height adds extra work when wrapping the roof.

Bollinger B1 wrap ideas start with the parts that need special attention. The tailgate has the rear glass set into it, so the film ends at the edge of the glass and the tailgate is wrapped as one panel. The charge port door is an electric car detail that is wrapped as a small separate piece, and the tall body means the roof is wrapped from a platform.

For a Bollinger B1, how much vinyl to wrap a Bollinger B1 depends on the film type and the one generation in the catalog. A full wrap of the 2022–now body takes about 61 ft (18.5 m) of standard cast film, but chrome or patterned film needs about 76 ft (23 m) because of the extra material for matching and waste.

More Bollinger wraps

Questions about wrapping a Bollinger B1

How much vinyl does it take to wrap a Bollinger B1?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Bollinger B1. That figure is for the newest body, the 2022–now first generation, and standard film. Chrome or patterned film would be about 76 ft (23 m).

Can I wrap only the hood or the roof of a Bollinger B1?

Yes, you can wrap only the hood or the roof of a Bollinger B1. A partial wrap can be the roof, hood, or mirror caps, and a shop can do chrome delete or paint protection film on the front end. The roof is wrapped from a platform because of the tall body.

Is a Bollinger B1 hard to wrap?

A Bollinger B1 is not the easiest car to wrap, because the tall body and the separate charge port door add work. The B1 is 72.7 in (1,847 mm) high, so the roof must be wrapped from a platform. The tailgate has the rear glass set into it, which means the film ends at the edge of the glass.

How many generations of the Bollinger B1 does this page cover?

This page covers one generation of the Bollinger B1. The catalog lists only the first generation, produced from 2022 to now, in the five-door SUV body.