Wraps by car

Bollinger B2 wrap

The Bollinger B2 wrap page covers the first generation of the Bollinger B2 pickup, produced from 2022 to now. A full vinyl wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. The catalog includes one generation only, with a pickup body style and four doors. This page explains what the wrap involves for this electric truck.

1generations21 mof film for a full wrap

Bollinger B2, first generation, factory photo
Bollinger B2, first generation. Factory color shown.

Bollinger B2 wrap colors and ideas

  • Bollinger B2 black wrap
  • Bollinger B2 white wrap
  • Bollinger B2 gray wrap
  • Bollinger B2 silver wrap
  • Bollinger B2 red wrap
  • Bollinger B2 blue wrap
  • Bollinger B2 green wrap
  • Bollinger B2 yellow wrap
  • Bollinger B2 orange wrap
  • Bollinger B2 purple wrap
  • Bollinger B2 pink wrap
  • Bollinger B2 teal wrap
  • Bollinger B2 brown wrap
  • Bollinger B2 gold wrap
  • Bollinger B2 chrome wrap
  • Bollinger B2 color shift wrap
  • Bollinger B2 carbon fiber wrap
  • Bollinger B2 camo and patterned wrap

How much vinyl to wrap a Bollinger B2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowpickup (4 doors)207.5 in (5,271 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Bollinger B2 wrap cost factors

Bollinger B2 wrap cost depends on the film type, the finish, and the amount of labor for this 207.5 in (5,271 mm) pickup. A chrome or patterned film needs about 80 ft (24.5 m), while a standard cast film uses about 69 ft (21 m) of 60-inch (1.52 m) material. The tall roof and the separate bed add time to the installation. Surface preparation and any repairs before wrapping also affect the final cost.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (72.7 in (1,847 mm)): the roof is wrapped from a platform.

Bollinger B2 wraps by generation

Swipe sideways. Tap a card for the full description.

Bollinger B2, first generation, factory photo
Factory color shown

2022–now Bollinger B2 pickup (first generation)

2022–nowpickup (4 doors)207.5 in (5,271 mm)

The first generation Bollinger B2 is a pickup with four doors, produced from 2022 to now. The pickup bed means the cab and the bed are wrapped as two bodies, and the inside of the bed stays bare. This generation is the only one in the catalog, so film estimates are consistent at about 69 ft (21 m) of 60-inch (1.52 m) cast film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (72.7 in (1,847 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Bollinger B2

Bollinger B2 partial wrap jobs include the roof, hood, and mirror caps without covering the whole truck. A chrome delete on a Bollinger B2 covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to shield it from stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bollinger B2: body, cut-outs and film

A Bollinger B2 vinyl wrap deals with a 207.5 in (5,271 mm) long pickup body with four doors. The tall body at 72.7 in (1,847 mm) means the roof is wrapped from a platform. Since the cab and the bed are separate enclosed bodies, the film is planned as two main pieces. The bed interior is left unwrapped, so the total vinyl needed is about 69 ft (21 m) of 60-inch (1.52 m) film.

Bollinger B2 wrap ideas start with the charge port door, which is wrapped as a small piece of its own. The pickup bed requires the cab and the bed to be covered as two bodies. The roof height of 72.7 in (1,847 mm) makes a platform necessary for safe installation. Mirrors and door handles are typically removed or carefully cut around during the wrap.

How much vinyl to wrap a Bollinger B2 is straightforward because only one generation is listed. The first generation, from 2022 to now, uses about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the estimate rises to about 80 ft (24.5 m). That difference comes from more waste when matching patterns or covering extra trim.

More Bollinger wraps

Questions about wrapping a Bollinger B2

How much vinyl does it take to wrap a Bollinger B2?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap a Bollinger B2. For chrome or patterned film, the estimate is about 80 ft (24.5 m). These figures are for the first generation pickup, which is the only body listed.

Is the bed of a Bollinger B2 wrapped?

No, the inside of the bed of a Bollinger B2 is not wrapped. The cab and the outside of the bed are wrapped as two separate bodies. Only the exterior surfaces get vinyl, so the bed interior stays bare.

Can I wrap only the hood or the roof of a Bollinger B2?

Yes, you can wrap only the hood or the roof of a Bollinger B2. Partial wrap options include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges, and paint protection film goes on the front end.

Is a Bollinger B2 hard to wrap?

Yes, a Bollinger B2 is harder to wrap than a standard car because of its tall roof and separate bed. The roof height of 72.7 in (1,847 mm) means installers need a platform. The charge port door is wrapped as a small piece, and the cab and bed are treated as two bodies.