Ordering a Han wrapped in black starts with selecting the finish, then the film line within that finish. Decide whether you want a full color change or a partial black wrap on specific panels. The black film you pick will sit against the glass roof and the untaped body lines, so look at it next to those elements before committing. The body in these photos shows the same sedan body from 2020 to now using the catalog's data for a wrap of this size.
Factory paint still decides what you see at the edges, inside the door jambs and under the hood. A black wrap will leave those areas in the original color unless you wrap the jambs as well. On the Han, the film ends at the roof rails and every flush door handle and parking sensor is cut as its own piece. The seams around the charge port door and the cameras also show the original paint, so plan those details with your installer.
A black wrap on a BYD Han is removable, which means you can return the car to factory paint without leaving adhesive behind when the film is removed properly. Wash the car by hand to keep edges from lifting on the door handles and sensors. A touch-free spray will not get the lower body clean enough, and a brush tunnel will catch the film edges. The wrap will not damage the paint when it is removed by an installer who follows the film maker's directions.